Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*SU\'s\s+running\s+rich\,\s+leaner\s+needles\?\s+70\s+MGB\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*SU\'s\s+running\s+rich\,\s+leaner\s+needles\?\s+70\s+MGB\s*$/: 4 ]

Total 4 documents matching your query.

1. SU's running rich, leaner needles? 70 MGB (score: 1): Author: "Dereck C" <derex39@hotmail.com>; Date: Mon, 28 Aug 2000 17:04:42 GMT; Well I have searched the archives for most of the morning and have decided to go ahead and ask some questions. 1) What is the leaner needle for AUD405 SU's (moss catalog does not list one)? As you ma; /html/mgs/2000-08/msg01599.html (7,832 bytes)
2. Re: SU's running rich, leaner needles? 70 MGB (score: 1): Author: <paul.hunt1@virgin.net>; Date: Mon, 28 Aug 2000 20:12:13 +0100; You might like to have a look at a list of needles on the web site below - select 'Spanners' and 'SU Needles'. Is the shoulder on the needle flush with the base of the piston? Are you sure the jets a; /html/mgs/2000-08/msg01615.html (9,115 bytes)
3. Re: SU's running rich, leaner needles? 70 MGB (score: 1): Author: Max Heim <mvheim@studiolimage.com>; Date: Mon, 28 Aug 2000 12:41:08 -0700; With these, you adjust the float height by using extra washers under the valve seat. Check to see if your float height is within spec. Dereck C had this to say: -- Max Heim '66 MGB GHN3L76149 If you'; /html/mgs/2000-08/msg01618.html (7,201 bytes)
4. Re: SU's running rich, leaner needles? 70 MGB (score: 1): Author: David Ambrose <stargazer1@home.com>; Date: Mon, 28 Aug 2000 14:22:42 -0700; I double check the float height by letting out the choke, taking off the piston, and letting the carb bowls fill wth fuel. Looking down into the jet opening, you should see the fuel about 1/16" below; /html/mgs/2000-08/msg01627.html (7,579 bytes)

Current List: 1 - 4
Page: [1]