Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Should\s+I\s+be\s+concerned\?\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Should\s+I\s+be\s+concerned\?\s*$/: 7 ]

Total 7 documents matching your query.

1. Should I be concerned? (score: 1): Author: "Simon Matthews" <simon_atwork@hotmail.com>; Date: Thu, 11 Mar 1999 09:53:29 PST; After the threads on engines 'pissing' between plugs #2 and #3, I looked at my engine. It is seeping very small amounts of oil between plugs #1 and #2 (between the head and block). ALso, I notice tha; /html/mgs/1999-03/msg00611.html (7,262 bytes)
2. Re: Should I be concerned? (score: 1): Author: H4aardvrk@aol.com; Date: Thu, 11 Mar 1999 12:59:28 EST; << hould I be immediately concerned about either of these items? There is no evidence of water contaminating the oil nor is there any great loss of coolant. simon, Any time there is a blown head gask; /html/mgs/1999-03/msg00613.html (7,236 bytes)
3. Re: Should I be concerned? (score: 1): Author: ccrobins <ccrobins@ktc.com>; Date: Fri, 12 Mar 1999 11:09:22 -0600; The leak can only get worse. Before it does, if I were you, I'd replace the head gasket and include John Twist's piece of wire. Check the head to make sure it isn't slightly warped, too. There were; /html/mgs/1999-03/msg00667.html (7,028 bytes)
4. Re: Should I be concerned? (score: 1): Author: "Paul Hunt" <paul.hunt1@virgin.net>; Date: Thu, 11 Mar 1999 21:01:54 -0000; Change the freeze plug before it strands you, and you feel obliged to blame the unreliability of an LBC. PaulH. http://freespace.virgin.net/paul.hunt1/; /html/mgs/1999-03/msg00689.html (7,901 bytes)
5. Re: Should I be concerned? (score: 1): Author: Eric Zambori <eaz@snet.net>; Date: Mon, 15 Mar 1999 08:14:34 -0800; Regarding John Twist's solution, I read the tech note regarding the addition of a piece of wire on the head gasket and I'm unclear as to what size wire should be used. If I understand the description; /html/mgs/1999-03/msg00819.html (7,487 bytes)
6. RE: Should I be concerned? (score: 1): Author: Larry Hoy <larryhoy@cwix.com>; Date: Mon, 15 Mar 1999 08:02:51 -0700; The smaller the better, but any "standard" stranded wire will work. Speaker wire probably has some of the smallest wires. I used two strands, I thought that was what Twist recommends. This (and coun; /html/mgs/1999-03/msg00826.html (7,644 bytes)
7. Re: Should I be concerned? (score: 1): Author: ccrobins <ccrobins@ktc.com>; Date: Wed, 17 Mar 1999 06:29:20 -0600; As I recall he says to use two strands twisted together. I stripped a piece of #18 stranded hookup wire about 18" long, extracted two strands, twisted them together and laid them along the right sid; /html/mgs/1999-03/msg00941.html (7,100 bytes)

Current List: 1 - 7
Page: [1]