- 1. Speedo Woes '65 BJ8 (score: 1)
- Author: "Doug Newton" <dnewton@nappco.com>
- Date: Mon, 25 Jul 2005 09:20:06 -0500
- Good Morning Group My speedometer has been inoperative since I bought my car early this year and since I needed to remove the trans tunnel, I decided to see what I could do to rectify the problem. I
- /html/healeys/2005-07/msg00698.html (7,983 bytes)
- 2. Re: Speedo Woes '65 BJ8 (score: 1)
- Author: Blue One Hundred <healey.nut@gmail.com>
- Date: Mon, 25 Jul 2005 23:24:44 +0800
- You don't need to pull the tunnel to check the cable and angle drive. Simply unscrew the cable from the back of the guage and then drive the car around while looking at the end of the cable to see i
- /html/healeys/2005-07/msg00699.html (9,158 bytes)
- 3. Re: Speedo Woes '65 BJ8 (score: 1)
- Author: Dave & M <rusd@velocitus.net>
- Date: Mon, 25 Jul 2005 22:44:51 -0600
- Hi Keith, In order for Nissonger or anyone else to check speedo calibration, it is necessary for you to furnish the CORRECT "revolutions per mile" for your particular car. There are a number of 'poss
- /html/healeys/2005-07/msg00718.html (9,163 bytes)
- 4. Re: Speedo Woes '65 BJ8 (score: 1)
- Author: David Nock <healeydoc@sbcglobal.net>
- Date: Tue, 26 Jul 2005 08:34:40 -0700
- Dave how is this going to work???? There is a number in the speedo face. 960, 1250, 1325. This is the number of revs per mile. If you measure out 52.8 feet and count the revs of the cable you will ge
- /html/healeys/2005-07/msg00725.html (7,879 bytes)
- 5. Re: Speedo Woes '65 BJ8 (score: 1)
- Author: SJNNOCK@aol.com
- Date: Tue, 26 Jul 2005 23:38:09 EDT
- Doug ... To check your speedo for rev. per mile of the cable and a dealer service bulletin about the speedo cable check my Teck Talk book on pages 81 & 149 ... if you dont have this book see below ..
- /html/healeys/2005-07/msg00751.html (7,588 bytes)
This search system is powered by
Namazu