- 1. Re: Speedo trouble (score: 1)
- Author: Steve Laifman <laifman@flash.net>
- Date: Thu, 03 Sep 1998 18:05:34 -0700
- John, Yes, that cable was too long and pressed against the drive mechanism. A definite no-no. What you describe is the result. Two recommendations. 1) Never buy ANYTHING from VB. 2) Sent your speedo
- /html/tigers/1998-09/msg00040.html (7,988 bytes)
- 2. RE: Speedo trouble (score: 1)
- Author: "Allan Connell" <alcon@earthlink.net>
- Date: Fri, 4 Sep 1998 00:36:24 -0700
- Early in my experience with my Tiger I too made the mistake of buying a speedo cable from VB. Way too long, wrong fittings and would not fit worth a damn. Stuck with my dilemma, I decided on some wor
- /html/tigers/1998-09/msg00047.html (9,385 bytes)
- 3. Re: Speedo trouble (score: 1)
- Author: "Joe Hankins" <jhankins@ix.netcom.com>
- Date: Fri, 4 Sep 1998 20:25:34 -0400
- Looks like I'm in good company! I, too, ordered a speedo cable from VB, and it wrecked my speedo. I've got the speedo rebuilt, but still don't have a cable. Any suggestions? BTW, I also orderd brake
- /html/tigers/1998-09/msg00051.html (6,881 bytes)
- 4. Re: Speedo trouble (score: 1)
- Author: Bill Martin <bmartin@snf.Stanford.EDU>
- Date: Fri, 4 Sep 1998 07:17:31 -0700 (PDT)
- Get a new cable from Sunbeam specialties, 408-371-1642. Norm and I have found that even with a new cable you can't crank the fitting tight at the back of the speedo, we are leaving them loose so as
- /html/tigers/1998-09/msg00055.html (7,270 bytes)
- 5. Re: Speedo trouble (score: 1)
- Author: Steve Lemp <steve@ramus.com>
- Date: Fri, 04 Sep 1998 07:56:54 -0700
- Just thought I'd pass on a little bit of my own experience. I too had a problem with my speedo. It started with an irratic reading and then gave up the ghost all together. I sent it off to Margaret a
- /html/tigers/1998-09/msg00059.html (7,961 bytes)
- 6. Re: Speedo trouble (score: 1)
- Author: Steve Laifman <laifman@flash.net>
- Date: Fri, 04 Sep 1998 08:43:17 -0700
- Joe, When I had my speedo cable (insides) changed I went to a speedo shop. They measured the original cable, and made the new one to the same dimensions. Later, when I changed transmissions, the spee
- /html/tigers/1998-09/msg00063.html (8,953 bytes)
This search system is powered by
Namazu