Having traversed another 500 miles it was time to grease the TD. I took care of all the fittings from the suspension to prop shaft to water pump etc. But I found I do not have the fitting on my pedal
Don't grease the water pump often or much. Excess grease will come out on the pulley and sling all over the inside of you hood. But I found I do not have the fitting on my pedal shaft assembly. The
Steve: The grease fitting was put there for a specific purpose, namely to lubricate the foot lever shaft. It will be important to replace the nipple and to lubricate regularly as without grease on th
Thanks, Geoff. I am going to look at it again. It looks as though it has been soldered or even welded and filed smooth. Can I still attempt to drill it out. I can't find any schematics even showing i
Geoff, As I recall I am referring to the wrong side of the frame box. I think there is an 'opening' of the shaft at the area in which you refer. Is there a standard fitting I should look for or get o
Steve: The nipple is a cheap item from Moss Motors. I expect the S&H will be more than the cost of the item. I do not remember if the thread is a peculiar British one or not, so best gop with the rep