Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*TR3\s+Leaf\s+Spring\s+Front\s+Attachment\s+Pin\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*TR3\s+Leaf\s+Spring\s+Front\s+Attachment\s+Pin\s*$/: 6 ]

Total 6 documents matching your query.

1. TR3 Leaf Spring Front Attachment Pin (score: 1): Author: "John Herrera" <jrherrera90@hotmail.com>; Date: Wed, 17 Dec 2003 19:58:32 -0500; I tried to remove the pin that holds the front of the rear suspension spring to the frame on my TR3. As some of you are probably well aware, removal of this pin must be accomplished by pulling it to; /html/fot/2003-12/msg00177.html (8,507 bytes)
2. TR3 Leaf Spring Front Attachment Pin (score: 1): Author: Catpusher@aol.com; Date: Wed, 17 Dec 2003 20:40:01 EST; The too late advise it to always use a double coat of anti-seize when installing the pin. The fact that you have it part way out is good; you can apply more penetrating oil (from both ends)and HEAT.; /html/fot/2003-12/msg00178.html (8,295 bytes)
3. Re: TR3 Leaf Spring Front Attachment Pin (score: 1): Author: "elliottd" <elliottd@look.ca>; Date: Thu, 18 Dec 2003 11:12:32 -0500; John - I good friend, Max Jaffe (original owner - 1960 TR3A) in Pacific Palisades, Calif. once told me how he did it with eye-bolts into the threads in the inside ends of the seized bolts. Then with; /html/fot/2003-12/msg00202.html (10,821 bytes)
4. Re: TR3 Leaf Spring Front Attachment Pin (score: 1): Author: "Stutzman" <stutzman@adelphia.net>; Date: Fri, 19 Dec 2003 00:11:07 -0500; bad idea. the head of that pin is D shaped and, I think, is welded to the frame. bruce -- Original Message -- From: "John Herrera" <jrherrera90@hotmail.com> To: <fot@autox.team.net> Sent: Wednesday,; /html/fot/2003-12/msg00204.html (9,285 bytes)
5. Re: TR3 Leaf Spring Front Attachment Pin (score: 1): Author: WEmery7451@aol.com; Date: Fri, 19 Dec 2003 15:38:37 EST; << It came out about halfway and stopped, and no amount of beating and name-calling would budge it any further. >> You got a lot further than I did. I recently tried to take a leaf spring off of the; /html/fot/2003-12/msg00214.html (7,690 bytes)
6. RE: TR3 Leaf Spring Front Attachment Pin (score: 1): Author: Bill Babcock <BillB@bnj.com>; Date: Fri, 19 Dec 2003 13:50:19 -0800; For any stuck part with a bit of a shaft showing, I've found making a special tip for an air chisel works better than anything. I make a "chisel" and two adapter parts--the chisel is a blunt rod with; /html/fot/2003-12/msg00217.html (8,604 bytes)

Current List: 1 - 6
Page: [1]