Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*TR4\s+mounts\s+\-round\s+or\s+square\?\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*TR4\s+mounts\s+\-round\s+or\s+square\?\s*$/: 7 ]

Total 7 documents matching your query.

1. TR4 mounts -round or square? (score: 1): Author: Unknown; Date: Mon, 21 Aug 2000 12:47:56 EDT; Hi List Anyone have experience with the round and rectangular motor mounts? Most parts houses seem to promote the original round ones - Moss USA and Moss International shows both square and round and; /html/triumphs/2000-08/msg01121.html (7,178 bytes)
2. Re: TR4 mounts -round or square? (score: 1): Author: Unknown; Date: Mon, 21 Aug 2000 12:37:17 -0500charset="iso-8859-1"; -- Original Message -- From <CarlSereda at aol.com> my Cambridge Motorsports in England sells round motor mounts for the TR4 that are much larger and stronger than the stock mounts. I have them in my; /html/triumphs/2000-08/msg01128.html (7,866 bytes)
3. RE: TR4 mounts -round or square? (score: 1): Author: Unknown; Date: Wed, 23 Aug 2000 21:22:13 -0400charset="iso-8859-1"; There were square ones on my car that came off in the rebuild. The passengers side mount was separated an causing a loud banging noise under heavy throttle. Drove me nuts... spent an entire summer t; /html/triumphs/2000-08/msg01244.html (8,329 bytes)
4. RE: TR4 mounts -round or square? (score: 1): Author: Unknown; Date: Wed, 23 Aug 2000 22:03:33 EDT; Seems to make sense to re-install your torque arm and rubber button Brian if you have the round TR4 motor mounts.. if you've seen the torque in action you'd see why the torque arm was added .. open t; /html/triumphs/2000-08/msg01247.html (7,865 bytes)
5. RE: TR4 mounts -round or square? (score: 1): Author: Unknown; Date: Thu, 24 Aug 2000 10:09:03 -0700; Shore is actually a standardized measure of the hardness of the rubber, which is only loosely related to it's shear rate. Don't have the details handy, but Shore hardness is measured by applying a st; /html/triumphs/2000-08/msg01274.html (7,311 bytes)
6. RE: TR4 mounts -round or square? (score: 1): Author: Unknown; Date: Thu, 24 Aug 2000 19:24:40 -0400; Message text written by Randall Young Shore is actually a standardized measure of the hardness of the rubber, which is only loosely related to it's shear rate. Don't have the details handy, but Shore; /html/triumphs/2000-08/msg01305.html (7,314 bytes)
7. RE: TR4 mounts -round or square? (score: 1): Author: Unknown; Date: Fri, 25 Aug 2000 02:45:24 -0400charset="iso-8859-1"; My 62 TR4 (I have owned it for over 34 years) has the square ones. I acquired a square replacement set from TRF but have not yet installed them. Cheers Keith; /html/triumphs/2000-08/msg01306.html (6,865 bytes)

Current List: 1 - 7
Page: [1]