- 1. TR6 - Elec Prob - Ignition Wires (score: 1)
- Author: JoeSimcoe@aol.com
- Date: Fri, 15 Mar 1996 16:44:30 -0500
- Need some advice - has anyone encountered a problem with the wires between the ignition switch and the coil becoming loose and malfunctioning. There doesn't appear to be any actual "short" - just as
- /html/triumphs/1996-03/msg00416.html (7,713 bytes)
- 2. Re: TR6 - Elec Prob - Ignition Wires (score: 1)
- Author: aj253@rgfn.epcc.Edu (Tony Robinson)
- Date: Fri, 15 Mar 96 14:57:53 MST
- Joe, Not likely that it is merely the connection. If it were, your problem would be intermittant since the connection would come and go. Sounds more like the coil is grounding internally. Try anothe
- /html/triumphs/1996-03/msg00417.html (8,794 bytes)
- 3. Re: TR6 - Elec Prob - Ignition Wires (score: 1)
- Author: aj253@rgfn.epcc.Edu (Tony Robinson)
- Date: Fri, 15 Mar 96 23:47:55 MST
- Joe, Okay, if you can pretty much rule out a problem in the coil, try by-passing the switch by going from positive side of battery to the coil. You can start the car with remote starter switch or by
- /html/triumphs/1996-03/msg00428.html (8,264 bytes)
- 4. Re: TR6 - Elec Prob - Ignition Wires (score: 1)
- Author: JoeSimcoe@aol.com
- Date: Sat, 16 Mar 1996 12:16:19 -0500
- Ron, <<I had problem with one of the wires inside the plastic plug on the back of the ignition switch a few weeks ago. The wires are simply push on spade connectors and could easly come off. I would
- /html/triumphs/1996-03/msg00441.html (7,804 bytes)
- 5. TR6 - Elec Prob - Ignition Wires (score: 1)
- Author: tgentr@rw1.rworld.com
- Date: 16 Mar 1996 16:50:12 EDT
- Joe, when a wire breaks internally (this is called "open" as opposed to a "short") it is usually at a high stress area. The first thing to try is cut off the end at the coil, go back 1/2 inch or so
- /html/triumphs/1996-03/msg00448.html (7,530 bytes)
- 6. Re: TR6 - Elec Prob - Ignition Wires (score: 1)
- Author: JoeSimcoe@aol.com
- Date: Sat, 16 Mar 1996 18:11:09 -0500
- Tom and all who gave me some advice on this - I found the problem, I am pretty sure - appears that the connector on the wiring harness (original I am sure) had one of the female connectors (five in t
- /html/triumphs/1996-03/msg00449.html (7,752 bytes)
- 7. Re: TR6 - Elec Prob - Ignition Wires (score: 1)
- Author: TR6Massey@aol.com
- Date: Mon, 18 Mar 1996 05:11:31 -0500
- Joe writes about an intermitttent electrical problem. Joe: Intermittent electrical problems keep electrical experts up at night. These are the worst problems to diagnose. You didn't mention which mod
- /html/triumphs/1996-03/msg00458.html (8,140 bytes)
This search system is powered by
Namazu