- 1. Re: TR6 Compression (score: 1)
- Author: "Mark J. Bradakis" <mjb@autox.team.net>
- Date: Thu, 1 Sep 2005 01:45:25 -0600
- Here's a chart I think I posted a few years back. Some of these are my measurements, some taken from the first editions of Kas' competition guides. The table gives the compression ratio, overall thic
- /html/fot/2005-09/msg00003.html (7,231 bytes)
- 2. TR6 Compression (score: 1)
- Author: "Joe Siam" <jsiam1@earthlink.net>
- Date: Wed, 31 Aug 2005 06:03:57 -0700
- TR6 compression What is the difference between the high and low compression head? What is the thickness of a high and low head? thanks Joe
- /html/fot/2005-08/msg00420.html (6,398 bytes)
- 3. Re: TR6 Compression (score: 1)
- Author: Chuck Arnold <chuck.arnold@oracle.com>
- Date: Wed, 31 Aug 2005 08:20:43 -0700
- I have a late model TR6 head -- has the wider distance between the ports. It is about 3.55 inches thick in stock form. I had it milled to 3.30 inches. Taking this quarter inch off has raised the com
- /html/fot/2005-08/msg00422.html (6,733 bytes)
- 4. Re: TR6 Compression (score: 1)
- Author: "Charly Mitchel" <charly@mitchelplumbing.com>
- Date: Wed, 31 Aug 2005 09:00:18 -0700
- According to the TR6 prep manual, 3.375" gives a compression ratio of 10.25:1. This is with zero deck clearance. it appears that if you mill it to 3.295" you get a CR of 12:3:1 with zero deck clearan
- /html/fot/2005-08/msg00424.html (7,430 bytes)
This search system is powered by
Namazu