- 1. TR6 Flywheel (score: 1)
- Author: "Mike Rose" <lytspeed@wcnet.org>
- Date: Sat, 27 Oct 2001 11:11:40 -0400
- I have been receiving conflicting advice from a couple of sources and I would appreciate it if anyone can tell me for sure whether a TR6 flywheel will fit a TR4 crank. And, if it will fit, will the T
- /html/fot/2001-10/msg00267.html (7,257 bytes)
- 2. TR6 Flywheel (score: 1)
- Author: N197TR4@cs.com
- Date: Sat, 27 Oct 2001 13:38:02 EDT
- There are a myriad of combinations, depending on from where you start from. You are starting from early TR4 to later transmission...here is my list, if I dont forget something: If you cant find later
- /html/fot/2001-10/msg00268.html (8,497 bytes)
- 3. Re: TR6 Flywheel (score: 1)
- Author: Henry Frye <thefryes@iconn.net>
- Date: Sat, 27 Oct 2001 13:58:54 -0400
- Not sure, but I do not think they were interchangeable. See cop out answer above. Again, see cop out answer above. Ah, something I can comment on with direct knowledge. Yes, the gearboxes are pretty
- /html/fot/2001-10/msg00269.html (9,136 bytes)
- 4. Re: TR6 Flywheel (score: 1)
- Author: Randall <randallyoung@earthlink.net>
- Date: Sat, 27 Oct 2001 11:13:13 -0700
- Not without a _lot_ of modification. The 6-cyl crank flange is smaller, so is the bolt circle. (I've got both engines sitting in the garage at the moment, so I double-checked.) No. Different tooth pi
- /html/fot/2001-10/msg00270.html (9,003 bytes)
- 5. Re: TR6 Flywheel (score: 1)
- Author: Gt6steve@aol.com
- Date: Sat, 27 Oct 2001 16:05:27 EDT
- With all this TR clutch/trans expertise on line, does anybody know what a Quinton Hazell QKT151AF clutch kit fits? It's got another part number 4-027 on it but I don't recognize the pieces. Large dia
- /html/fot/2001-10/msg00272.html (6,799 bytes)
- 6. Re: TR6 Flywheel (score: 1)
- Author: N197TR4@cs.com
- Date: Sat, 27 Oct 2001 19:09:35 EDT
- I stand corrected on the flywheel. Clutch kit is OK if you use LuK
- /html/fot/2001-10/msg00273.html (6,550 bytes)
This search system is powered by
Namazu