Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Tappet\s+Cover\s+Reinforcement\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Tappet\s+Cover\s+Reinforcement\s*$/: 9 ]

Total 9 documents matching your query.

1. Tappet Cover Reinforcement (score: 1): Author: "Thomas James Pokrefke, III" <pokrefke@datastar.net>; Date: Wed, 4 Feb 1998 16:43:35 -0600; I was sitting at a stop light today in the B admiring the nice oil smoke that my car puts off. Oil leaks past the tappet cover, runs down the block, and hits the hot exhaust pipe. 007 would be proud.; /html/mgs/1998-02/msg00215.html (7,845 bytes)
2. Re: Tappet Cover Reinforcement (score: 1): Author: mgbob@juno.com (ROBERT G. HOWARD); Date: Wed, 04 Feb 1998 18:06:55 EST; Why is it leaking there? Is the cover warped? I ask, because a friend of mine who noticed my constant efforts to stop the leaks from the rocker cover in my TD suggested I look to see if it were bent.; /html/mgs/1998-02/msg00218.html (8,940 bytes)
3. Re: Tappet Cover Reinforcement (score: 1): Author: Robert Allen <boballen@sky.net>; Date: Thu, 05 Feb 1998 08:04:52 -0600; The easiest way to justify one of those boy-racer aluminum valve covers is that they are cast flat on the bottom where they contact the head. I use "aviation gasket sealer" that comes in a small (pla; /html/mgs/1998-02/msg00246.html (8,935 bytes)
4. Re: Tappet Cover Reinforcement (score: 1): Author: miker15@juno.com; Date: Thu, 5 Feb 1998 11:36:21 EST; On Thu, 05 Feb 1998 08:04:52 -0600 Robert Allen <boballen@sky.net> , I observed that there seemed to be enough tension to hold the cover to the head. Again, the sealer was "They may be ribbed for her; /html/mgs/1998-02/msg00258.html (8,178 bytes)
5. Re: Tappet Cover Reinforcement (score: 1): Author: Paul Hunt <paul.hunt1@virgin.net>; Date: Sat, 07 Feb 1998 17:03:04 +0000; Try replacing the rubber compression washers under the fixing bolts, they are a service item. PaulH.; /html/mgs/1998-02/msg00629.html (8,205 bytes)
6. Re: Tappet Cover Reinforcement (score: 1): Author: Bill Schooler <schooler@erols.com>; Date: Wed, 11 Feb 1998 19:11:29 -0500; Is Thomas talking about the "tappet cover" or "rocker cover"? I thought he was referring to the tappet cover, but.....? -- *Bill Schooler *Check the MGCC Wash DC Centre Web Page *Woodbridge, VA *http; /html/mgs/1998-02/msg00665.html (8,807 bytes)
7. Re: Tappet Cover Reinforcement (score: 1): Author: "Thomas James Pokrefke, III" <pokrefke@datastar.net>; Date: Wed, 11 Feb 1998 18:11:31 -0600; I was talking about the tappet cover. Not too many people were able to differentiate. Thomas James Pokrefke, III; /html/mgs/1998-02/msg00666.html (7,461 bytes)
8. Re: Tappet Cover Reinforcement (score: 1): Author: Bill Schooler <schooler@erols.com>; Date: Wed, 11 Feb 1998 20:39:13 -0500; Thomas (and all other interested), Go to British Automotive's web page (http://www.mgbmga.com), click on Tech Info, then check out mgb 3. Believe you'll find this interesting and pertinent. -- *Bill; /html/mgs/1998-02/msg00678.html (8,002 bytes)
9. Re: Tappet Cover Reinforcement (score: 1): Author: "Thomas James Pokrefke, III" <pokrefke@datastar.net>; Date: Thu, 12 Feb 1998 11:38:53 -0600; HEY LOOK!!!!! AN MGB THREAD!!! Bill: Those covers sure seem like a nifty idea, but I think I can make my reinforcements for about $.04. Has anyone tried these? Thomas James Pokrefke, III -- thought; /html/mgs/1998-02/msg00724.html (8,657 bytes)

Current List: 1 - 9
Page: [1]