- 1. Re: Tiger wheel bolt pattern size (score: 1)
- Author: Jeff Howarth <jeff@v8tiger.demon.co.uk>
- Date: Mon, 1 Dec 1997 08:04:32 +0000
- the stud arrangement is 4 x 4 1/4 PCD (pitch circle diameter). This means that if you drew a circle form the centre of the hub to locate the studs, the diameter iof that circle is 4 1/4 inches or th
- /html/tigers/1997-12/msg00000.html (7,476 bytes)
- 2. Re: Tiger wheel bolt pattern size (score: 1)
- Author: Steve Laifman <laifman@flash.net>
- Date: Mon, 01 Dec 1997 10:39:42 +0100
- In the 60's, the English tire and wheel sizes were in inches. Same as ours. Although there are 25.4 mm/inch the wheel holes are 4 1/4 inches, which is more like 107.95 mm (close to 108, rounded). So
- /html/tigers/1997-12/msg00004.html (9,914 bytes)
- 3. Re: Tiger wheel bolt pattern size (score: 1)
- Author: Marc James Small <msmall@roanoke.infi.net>
- Date: Mon, 01 Dec 1997 14:11:27 -0500
- <<SNIP>> Well, the British currency was pounds, shillings (note spelling), and pence, with further divisions of the pence into half-pence and farthings. The Guinea was a currency of account only, 21
- /html/tigers/1997-12/msg00011.html (8,781 bytes)
- 4. Re: Tiger wheel bolt pattern size (score: 1)
- Author: Anita Barrett <anitabrt@mindspring.com>
- Date: Mon, 01 Dec 1997 19:03:04 -0500
- John, I agree with most every one else. The Tiger has 4X 4 1/4" pattern. A lot of 4 bolt Mustang, Caprii and Pinto wheels also have the 4 X 4 1/4 pattern, but they usually have slightly larger stud h
- /html/tigers/1997-12/msg00015.html (7,680 bytes)
- 5. Re: Tiger wheel bolt pattern size (score: 1)
- Author: mmeswarb@huntel.net
- Date: Tue, 02 Dec 1997 17:03:50 -0500
- To anyone running a late model American wheel on their Tiger, The best solution I found was a "E/T style" lug nut. It has both the taper and a sleeve like a mag wheel lug nut. This gives a tight, wel
- /html/tigers/1997-12/msg00032.html (7,839 bytes)
- 6. Tiger wheel bolt pattern size (score: 1)
- Author: john brawley <johnj7@gte.net>
- Date: Sun, 30 Nov 1997 19:03:10 -0800
- Can anyone tell the the bolt pattern size for the Tiger in mm and inches? Is it 4 X 108mm or 4 X 4.25 inches? Thanks, John
- /html/tigers/1997-11/msg00229.html (5,863 bytes)
This search system is powered by
Namazu