- 1. Transmission Help Needed on TR-6 (score: 1)
- Author: Unknown
- Date: Sun, 22 Jul 2001 20:14:04 EDT
- Hello All. Having trouble with third gear in a TR-6. Have rebuild this transmission. Replaced all scyros, bearings, thrust washers, first/second scyro hub, third and fourth scyro hub, and third gear.
- /html/triumphs/2001-07/msg01035.html (6,994 bytes)
- 2. Re: Transmission Help Needed on TR-6 (score: 1)
- Author: Unknown
- Date: Sun, 22 Jul 2001 20:30:54 -0400
- Hi John, A weak detent spring might affect 3rd gear different than 4th since 4th doesn't use any gears. I'd measure the force to pull it off the detent; should require 32 to 34 pounds. I've never mad
- /html/triumphs/2001-07/msg01036.html (8,364 bytes)
- 3. re: Transmission Help Needed on TR-6 (score: 1)
- Author: Unknown
- Date: Tue, 24 Jul 2001 07:55:02 -0400
- John, did you check the spring tension in the synchro hubs? If they are weak, then hub will allow it to pop back out too easily. -Tony Message text written by INTERNET:owner-triumphs-digest@autox.tea
- /html/triumphs/2001-07/msg01095.html (7,486 bytes)
- 4. Re: Transmission Help Needed on TR-6 (score: 1)
- Author: Unknown
- Date: Wed, 25 Jul 2001 21:32:54 -0400
- Had the exact same problem with a rebuilt unit. My problem was the 3/4 gear selector fork's prongs were bent, ever so slightly (They're bent towards the front of the car, as the fork mechanism is ja
- /html/triumphs/2001-07/msg01179.html (8,050 bytes)
This search system is powered by
Namazu