- 1. Turn signals kaput! (score: 1)
- Author: Lancer7676@aol.com
- Date: Wed, 21 Apr 1999 20:12:51 EDT
- Hey guys! My turn signals flat quit working. Went around and checked all the bulbs--all are good. Checked the fuses--nope! All four emergency flashers work. Felt around under the dash for disconnecte
- /html/spridgets/1999-04/msg01156.html (7,534 bytes)
- 2. Re: Turn signals kaput! (score: 1)
- Author: Frank Clarici <spritenut@Exit109.com>
- Date: Wed, 21 Apr 1999 20:26:56 -0400
- David Double check the fuse, sometimes, make that most of the time there is a dirty contact where the fuse plugs in. If that doesn't do it, check the wiring behind the consol, the signals are wired t
- /html/spridgets/1999-04/msg01158.html (8,768 bytes)
- 3. Re: Turn signals kaput! (score: 1)
- Author: Pete Phillips <phillipp@cfw.com>
- Date: Wed, 21 Apr 1999 21:03:50 -0400
- Thia may sound stupid, but it sometimes works. Snap the hazzard light switch real hard to on, then off. Try turn signals. I know it sounds dumb, but it spmetimes works. Pete Phillips 61 Bugeye
- /html/spridgets/1999-04/msg01164.html (8,343 bytes)
- 4. Re: Turn signals kaput! (score: 1)
- Author: Lancer7676@aol.com
- Date: Wed, 21 Apr 1999 22:22:08 EDT
- << I know it sounds dumb, but it spmetimes works. >> Pete: Ain't nothin' dumb about trying the unorthodox with these cars. Thanks!! --David
- /html/spridgets/1999-04/msg01170.html (7,605 bytes)
- 5. Re: Turn signals kaput! (score: 1)
- Author: "Steve Byers" <byers@cconnect.net>
- Date: Wed, 21 Apr 1999 23:00:28 -0400
- Whenever my signals quit working, it's usually the bad connections in the HAZARD switch on the console. Cycling the switch on and off a couple of times usually makes the turn signals work until the
- /html/spridgets/1999-04/msg01171.html (8,472 bytes)
- 6. Re: Turn signals kaput! (score: 1)
- Author: Lancer7676@aol.com
- Date: Thu, 22 Apr 1999 06:15:37 EDT
- << Whenever my signals quit working, it's usually the bad connections in the HAZARD switch on the console. Cycling the switch on and off a couple of times usually makes the turn signals work until th
- /html/spridgets/1999-04/msg01180.html (7,794 bytes)
- 7. Re: Turn signals kaput! (score: 1)
- Author: Michael Dietsche <mdietsche@yahoo.com>
- Date: Thu, 22 Apr 1999 06:28:42 -0700 (PDT)
- It could still be the hazard switch, even though the hazard function is ok. The switch selects between contact groups -- one group sets up the turn signals, the other group is the hazard. The switch
- /html/spridgets/1999-04/msg01182.html (9,293 bytes)
- 8. Re: Turn signals kaput! (score: 1)
- Author: "Paul A. Dolloff, Ph.D." <pauld@ekpc.com>
- Date: Thu, 22 Apr 1999 10:10:57 EST5EDT
- I read your post about the turn signals and got a lot of good information from it. Thanks. I have bought a console from a '75 Midget that I am going to put in my '66 Sprite. I noticed that the conso
- /html/spridgets/1999-04/msg01183.html (10,708 bytes)
- 9. Re: Turn signals kaput! (score: 1)
- Author: Michael Dietsche <mdietsche@yahoo.com>
- Date: Thu, 22 Apr 1999 08:15:54 -0700 (PDT)
- I had the same idea when I saw the way it was designed -- there's certainly other ways to wire the hazard. I have worked up a wiring diagram for a relayed hazard and many other changes, but I have no
- /html/spridgets/1999-04/msg01187.html (12,664 bytes)
This search system is powered by
Namazu