- 1. Valve clearence and cam relation (score: 1)
- Author: Enrique Claure <spanlab@ceibo.entelnet.bo>
- Date: Tue, 29 Aug 2000 23:51:55 -0400
- Hi list, if you put in a cam other than the stock cam will your valve clearances need to change from stock e.i 0.13 or 0.15 inch?. Enrique
- /html/mgs/2000-08/msg01685.html (6,712 bytes)
- 2. Re: Valve clearence and cam relation (score: 1)
- Author: Barney Gaylord <barneymg@ntsource.com>
- Date: Tue, 29 Aug 2000 23:13:03 -0500
- clearances need to change from stock e.i 0.13 or 0.15 inch?. Yup, that's a definite qualified maybe. Please consult the cam supplier. My original MGA valve clearance spec is .017" hot. My Crane Cams
- /html/mgs/2000-08/msg01688.html (7,086 bytes)
- 3. Re: Valve clearence and cam relation (score: 1)
- Author: "Andrew B. Lundgren" <lundgren@byu.net>
- Date: Wed, 30 Aug 2000 07:25:54 -0600 (MDT)
- My NW Import reground cams are .18 check with your manufacturer. -- Andrew Lundgren lundgren@byu.net http://www.itwest.net/~lundgren
- /html/mgs/2000-08/msg01697.html (6,983 bytes)
This search system is powered by
Namazu