- 1. Water Pump Grease Port (score: 1)
- Author: Bob Spidell <bspidell@comcast.net>
- Date: Sat, 22 Jul 2006 14:42:42 -0700
- A while back I wrote a message stating the that grease port on a Healey water pump was originally had a "flip up" cover. That was working from memory, but I replaced the original pump on my BJ8 over
- /html/healeys/2006-07/msg00593.html (7,639 bytes)
- 2. RE: Water Pump Grease Port (score: 1)
- Author: John Sims <ahbn6@optonline.net>
- Date: Sat, 22 Jul 2006 18:34:39 -0400
- I have what I believe to be an original on my BN6 and it has a grub screw. My original workshop manual AKD1179A refers to it as an "Oiling Screw". Hope this helps. John Sims, BN6 Aberdeen, NJ www.hea
- /html/healeys/2006-07/msg00594.html (7,903 bytes)
- 3. Water Pump Grease Port (score: 1)
- Author: Bob Spidell <bspidell@comcast.net>
- Date: Sat, 22 Jul 2006 21:26:58 -0700
- My unscientific poll--plus a quick check of the shop manual--indicates the original pumps had a threaded plug (i.e. a screw). A couple Listers have zerk fittings; I suspect these were added by POs. b
- /html/healeys/2006-07/msg00598.html (7,144 bytes)
- 4. Water Pump Grease Port (score: 1)
- Author: Bob Spidell <bspidell@comcast.net>
- Date: Sun, 23 Jul 2006 09:22:49 -0700
- My unscientific poll--plus a quick check of the shop manual--indicates the original pumps had a threaded plug (i.e. a screw). A couple Listers have zerk fittings; I suspect these were added by POs. b
- /html/healeys/2006-07/msg00599.html (7,114 bytes)
- 5. Re: Water Pump Grease Port (score: 1)
- Author: Bob Spidell <bspidell@comcast.net>
- Date: Sat, 22 Jul 2006 20:58:12 -0700
- My unscientific poll--plus a quick check of the shop manual--indicates the original pumps had a threaded plug (i.e. a screw). A couple Listers have zerk fittings; I suspect these were added by POs. b
- /html/healeys/2006-07/msg00600.html (8,853 bytes)
- 6. Re: Water Pump Grease Port (score: 1)
- Author: "P.J.Aeckerlin" <j.aeckerlin@tiscali.nl>
- Date: Sun, 23 Jul 2006 11:36:23 +0200
- The Driver's handbook of my BJ8 has a picture on page 44 and the text "Remove the plug on the water pump housing and inject a small amount of grease. Lubricate sparingly, otherwise grease will run p
- /html/healeys/2006-07/msg00606.html (8,296 bytes)
This search system is powered by
Namazu