- 1. Water Pump adaptor for heater line (score: 1)
- Author: "Francis P. Gowash" <fpgowash@cox.net>
- Date: Wed, 11 May 2005 17:12:43 -0400
- Hi again Well now that my heater is shot I would like to shut off the coolant flow at the water pump heater pipe adaptor. Since I don't plan on driving much in cold weather this seems like a good pla
- /html/triumphs/2005-05/msg00288.html (7,397 bytes)
- 2. Re: Water Pump adaptor for heater line (score: 1)
- Author: Bill & Skip Pugh <anabil@caltel.com>
- Date: Wed, 11 May 2005 14:36:56 -0700
- Hi Fran, You now have me very confused ... there is no water pump heater pipe adaptor ... the heater gets its water from the "faucet" on the right rear of the block. Or am I missing something here ??
- /html/triumphs/2005-05/msg00289.html (7,717 bytes)
- 3. RE: Water Pump adaptor for heater line (score: 1)
- Author: "Randall" <tr3driver@comcast.net>
- Date: Wed, 11 May 2005 14:42:15 -0700
- If you can remove the tube from the adaptor, and then unscrew the adaptor from the WP housing, the threads are a standard pipe thread and a pipe plug from the hardware store will work. Sorry, don't
- /html/triumphs/2005-05/msg00290.html (7,757 bytes)
- 4. Re: Water Pump adaptor for heater line (score: 1)
- Author: "Kinderlehrer" <kinderlehrer@comcast.net>
- Date: Wed, 11 May 2005 16:30:42 -0700
- Or maybe you could take the hose that went to the heater and run it across the engine and connect it to where the heater outlet hose went. Bob good plug
- /html/triumphs/2005-05/msg00295.html (8,022 bytes)
- 5. Re: Water Pump adaptor for heater line (score: 1)
- Author: Geo Hahn <ahwahnee@cybertrails.com>
- Date: Wed, 11 May 2005 18:45:05 -0700
- That's how Triumph did it when the car was sold w/o a heater. I think it is the same as the drain plugs on the engine, diff and gearbox -- 1/2"? At the other end you can shut off the tap or replace i
- /html/triumphs/2005-05/msg00298.html (7,577 bytes)
This search system is powered by
Namazu