- 1. Winscreen bracket Installation (score: 1)
- Author: "Bill Snyder" <wtsnyder@bellsouth.net>
- Date: Mon, 6 Feb 2006 09:09:52 -0500
- Hello list. I am to the point in my '53 TD resto where I need to install the cowl mounted windscreen support brackets. The problem is that I have a restored tub (professionally restored in 1964 and s
- /html/mg-t/2006-02/msg00002.html (7,816 bytes)
- 2. RE: Winscreen bracket Installation (score: 1)
- Author: Jesús Benajes <jbenajes@mot.upv.es
- Date: Mon, 6 Feb 2006 16:05:26 +0100
- My TD has now one bracket installed and the other not. I can take measurements and pictures of both sides. I will send them to you in less than 24 hours, if you do not need them earlier. Jesus 53 TD
- /html/mg-t/2006-02/msg00003.html (8,327 bytes)
- 3. Re: Winscreen bracket Installation (score: 1)
- Author: Bullwinkle <yd3@nvc.net>
- Date: Mon, 06 Feb 2006 14:21:22 -0800
- Even after getting the measurements, I would suggest fitting the sidescreens at the same time. That way you can make sure the fabric of the screens overlays the windshied flange, the side screens fr
- /html/mg-t/2006-02/msg00004.html (7,533 bytes)
- 4. Re: Winscreen bracket Installation (score: 1)
- Author: Bob Howard <mgbob@juno.com>
- Date: Mon, 6 Feb 2006 16:41:46 -0500
- Pictures from someone will be worth a thousand or more words on this question, I suspect. Let me know if you don't get better advice, and I can try to tape paper to my car and draw a template that m
- /html/mg-t/2006-02/msg00006.html (9,252 bytes)
- 5. RE: Winscreen bracket Installation (score: 1)
- Author: "Gene Gillam" <anngene@bellsouth.net>
- Date: Mon, 6 Feb 2006 17:45:14 -0600
- Bill asked about windscreen bracket installation measurements, Blake fore and aft location is also determined by the side screens location.< Bill, Blake, I agree with the first part of that statement
- /html/mg-t/2006-02/msg00007.html (7,917 bytes)
- 6. Re: Winscreen bracket Installation (score: 1)
- Author: Bullwinkle <yd3@nvc.net>
- Date: Mon, 06 Feb 2006 18:28:53 -0800
- <<<Snip>>> Can you see any holes from inside? I looked into the TD Service Parts List for bolts or screws <<<Snip>>> Bolts (1/4 BSF [I think] which are the same diameter but a different thread pitch
- /html/mg-t/2006-02/msg00008.html (7,730 bytes)
This search system is powered by
Namazu