- 1. Wire Wheel Adapter Removal (score: 1)
- Author: Unknown
- Date: Sun, 2 Apr 2000 17:38:17 -0400charset="iso-8859-1"
- I'm going to repack the front bearings and replace the grease seals on my '60 TR3A and need to remove the wire wheel adapters to get at the bearing nut. I can vaguely remember doing this a number of
- /html/triumphs/2000-04/msg00072.html (6,945 bytes)
- 2. Re: Wire Wheel Adapter Removal (score: 1)
- Author: Unknown
- Date: Sun, 2 Apr 2000 14:57:44 -0700 (PDT)
- Have a Lovely Assistant stand on the brake pedal while you undo the nuts! Won't work if the brake calipers are off though ;-) Don't take the nuts right off either, just crack them enough to allow you
- /html/triumphs/2000-04/msg00074.html (7,562 bytes)
- 3. wire wheel adapter removal (score: 1)
- Author: Unknown
- Date: Sun, 2 Apr 2000 17:54:12 -0000charset="x-user-defined"
- The only way is to have an assistant stand on the brake petal! When you put the adapters back on BE SURE to torque the four bolts to 60#. Lou Metelko
- /html/triumphs/2000-04/msg00076.html (6,649 bytes)
- 4. Re: Wire Wheel Adapter Removal (score: 1)
- Author: Unknown
- Date: Sun, 02 Apr 2000 19:29:15 -0500
- Just did it myself about 10 minutes ago...Clamp the rotor to the dust shield using vise grips. I used a couple of flat washers between the jaws of the vise grip and the car parts so I wouldn't scratc
- /html/triumphs/2000-04/msg00083.html (7,870 bytes)
- 5. Re: Wire Wheel Adapter Removal (score: 1)
- Author: Unknown
- Date: Sun, 2 Apr 2000 20:11:15 -0700charset="iso-8859-1"
- When I did this my "Lovely Assistant" was a 2x4 wedged between the brake peddle and the seat. my bearing time the
- /html/triumphs/2000-04/msg00089.html (8,536 bytes)
- 6. Re: Wire Wheel Adapter Removal (score: 1)
- Author: Unknown
- Date: Sun, 2 Apr 2000 23:32:03 EDT
- Put wife in front seat, both feet on brake....large vise grips...impact wrench..hang on I'll think of something else... RH
- /html/triumphs/2000-04/msg00090.html (6,983 bytes)
This search system is powered by
Namazu