- 1. Won't turn over (score: 1)
- Author: "Dean" <dht3000@adelphia.net>
- Date: Sun, 1 May 2005 10:43:09 -0400
- Well I took my BJ8 out for a nice Sunday drive and it ran beautifully. Came back home for breakfast. Then went back out to start the car and nothing but a clunk. So I thought I would catch it in gear
- /html/healeys/2005-05/msg00008.html (7,052 bytes)
- 2. RE: Won't turn over (score: 1)
- Author: "Gary Williams" <gwilliams54@hotmail.com>
- Date: Sun, 01 May 2005 08:21:48 -0700
- At the risk of asking the obvious, did you check the oil? GW
- /html/healeys/2005-05/msg00009.html (7,270 bytes)
- 3. Re: Won't turn over (score: 1)
- Author: "Rich C" <richchrysler@quickclic.net>
- Date: Sun, 1 May 2005 14:07:07 -0400
- Sounds like the starter pinion is stuck in mesh with the flywheel ring gear. I once bought an MGB that the owner thought had a siezed engine. We bought the car under that understanding, got it home a
- /html/healeys/2005-05/msg00017.html (7,744 bytes)
- 4. Re: Won't turn over (score: 1)
- Author: "Dean" <dht3000@adelphia.net>
- Date: Sun, 1 May 2005 17:38:42 -0400
- Well I took you guys advice and pulled my starter. Well I tried to pull my starter.I removed the 2 bolts that hold it in but it wouldn't budge. So I removed the cover for the starter pinion. I then t
- /html/healeys/2005-05/msg00022.html (7,608 bytes)
- 5. Re: Won't turn over (score: 1)
- Author: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
- Date: Mon, 2 May 2005 06:56:52 -0500
- Chances are that it was dropped from another day on a different job. Don't worry about the washer, too much hardware on these cars anyway. Think of all the extra zip that you'll have now without the
- /html/healeys/2005-05/msg00056.html (8,748 bytes)
This search system is powered by
Namazu