- 1. Zenith Carb Rebuild? (was "Won't Start...) (score: 1)
- Author: Jamey Harris <jameyh@charles.stanford.edu>
- Date: Mon, 27 Oct 1997 00:38:20 -0800 (PST)
- Those who have been following my misadventures know that I was having problems with a sticky float needle valve, and that I was planning to replace it with a grose jet. Before I get too far I will gi
- /html/mgs/1997-10/msg01885.html (8,178 bytes)
- 2. Re: Zenith Carb Rebuild? (was "Won't Start...) (score: 1)
- Author: Skip Kelsey <kelsey@value.net>
- Date: Mon, 27 Oct 1997 07:14:13 -0800
- There is a miniscule O ring at the bottom of the tube in the carb piston. It is held in place by an equally small star washer. You mest devise a small wood tool to remove the star washer, so that yo
- /html/mgs/1997-10/msg01898.html (9,073 bytes)
- 3. Re: Zenith Carb Rebuild? (was "Won't Start...) (score: 1)
- Author: Teacher122@aol.com
- Date: Mon, 27 Oct 1997 17:55:26 -0500 (EST)
- <<You mest devise a small wood tool to remove the star washer, so that you can change the O ring. If this O ring is bad, and they usually are, then it allows the carb to suck the oil our of the tube.
- /html/mgs/1997-10/msg01945.html (7,173 bytes)
- 4. Re: Zenith Carb Rebuild? (was "Won't Start...) (score: 1)
- Author: Adrian Jones <AdrianJones@compuserve.com>
- Date: Tue, 28 Oct 1997 10:48:26 -0500
- Hi there! I ended up using a piece of coat-hanger wire filed dow= n to 1/32" thick with a 1/32" hook on the end. It is fiddly work and requires some patience - you need to "hook" a kind of star wash
- /html/mgs/1997-10/msg02016.html (7,571 bytes)
This search system is powered by
Namazu