- 1. alloy strlps on back panel (score: 1)
- Author: "David" <pdburket@intrepid.net>
- Date: Mon, 29 Mar 1999 10:33:12 -0500
- Fellow Morganeers, Once again I come before you seeking your advice and wisdom. First let me thank you for your response regarding past request regarding mounting the windscreen and wings. My problem
- /html/morgans/1999-03/msg00277.html (7,405 bytes)
- 2. Re: alloy strlps on back panel (score: 1)
- Author: Stephen.Stierman@huntington.com
- Date: Mon, 29 Mar 1999 11:47:20 -0500
- I have always pre bent and fitted the strips prior to fitting them to the body. I also pre drill and counter sink the screw holes again before attaching, that way you can avoid any other screws hold
- /html/morgans/1999-03/msg00278.html (7,191 bytes)
- 3. Re: alloy strlps on back panel (score: 1)
- Author: Bob Nogueira <nogera@prodigy.net>
- Date: Mon, 29 Mar 99 23:42:13 -0500
- -- [ From: Bob Nogueira * EMC.Ver #3.1a ] -- David I have always trimmed the top to fit, bent the 1/2 round to fit, trip the bottom and then drilled the holes. I have found that using Drip Check ( a
- /html/morgans/1999-03/msg00290.html (8,713 bytes)
This search system is powered by
Namazu