Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*aluminum\s+head\s+for\s+mgb\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*aluminum\s+head\s+for\s+mgb\s*$/: 7 ]

Total 7 documents matching your query.

1. aluminum head for mgb (score: 1): Author: "Ted Stowe" <cessna@speakeasy.org>; Date: Tue, 28 Mar 2000 09:16:14 -0800; question for the group. what is the consensious on the crossflow head or the replacment aluminum head, (standard design) for a '77 mgb. I am under the impression that neither head would precisely mat; /html/mgs/2000-03/msg01503.html (7,382 bytes)
2. Re: aluminum head for mgb (score: 1): Author: "Andrew B. Lundgren" <Lundgren@iname.com>; Date: Tue, 28 Mar 2000 10:30:18 -0700 (MST); I put on a standard replacement AL head in Jan. Works great. I have an 18GD. I took it in and had heli-coils installed in the maniford stud holes, spark plug holes, and the rocker arm assembly holes.; /html/mgs/2000-03/msg01504.html (8,693 bytes)
3. Re: aluminum head for mgb (score: 1): Author: "Andrew B. Lundgren" <Lundgren@iname.com>; Date: Tue, 28 Mar 2000 12:08:57 -0700 (MST); My head did not require the heli-coils. I put those in as preventive maint. They only cost me about $75 and now I don't have to worry about the soft AL. The holes would have worked great, but I didn'; /html/mgs/2000-03/msg01505.html (11,686 bytes)
4. RE: aluminum head for mgb (score: 1): Author: Joe Short <buster_balz@operamail.com>; Date: Tue, 28 Mar 2000 14:21:07 -0500; I've been curious about these heads too. The catalogs all show them with the small intake valves. Can they be modified to accept the 1.625" intake valves ? They only cost me about $75 and now I don't; /html/mgs/2000-03/msg01506.html (12,444 bytes)
5. Re: aluminum head for mgb (score: 1): Author: Steve Darby <elan@efortress.com>; Date: Tue, 28 Mar 2000 12:29:28 -0700; I am Steve Darby, one of the original redesignors of the MS(Steve)X crossflow head. Email me a list of specific questions and I will answer them to the best of my ability. I also sell the stock confi; /html/mgs/2000-03/msg01507.html (7,817 bytes)
6. Re: aluminum head for mgb (score: 1): Author: Max Heim <mvheim@studiolimage.com>; Date: Tue, 28 Mar 2000 11:37:23 -0800; Just a suggestion -- run the sling diagonally from a front motor mount on one side to a bell housing bolt on the other side. The chain might scrape a little paint on the block but I've done it that w; /html/mgs/2000-03/msg01508.html (7,322 bytes)
7. Re: aluminum head for mgb (score: 1): Author: "Andrew B. Lundgren" <Lundgren@iname.com>; Date: Tue, 28 Mar 2000 12:46:05 -0700 (MST); Thanks! That sounds like it will work great. (On my block it will have to scrape the grime before it gets to the paint! :); /html/mgs/2000-03/msg01509.html (7,725 bytes)

Current List: 1 - 7
Page: [1]