- 1. Re: bad cylindar (score: 1)
- Author: HFC <froggi@cdsnet.net>
- Date: Sun, 03 Oct 1999 21:57:45 -0700
- Buy a leak-down tester! WFO Herb Keep the sticky side down!
- /html/spridgets/1999-10/msg00106.html (7,457 bytes)
- 2. bad cylindar (score: 1)
- Author: Midget02885@aol.com
- Date: Wed, 29 Sep 1999 20:57:48 EDT
- can anyone help me with this one... # 4 cylindar is not responding.. switched to new plugs, new wires, new distributor cap and rotor. Sprayed carb cleaner around intake manifold to check for vacumn l
- /html/spridgets/1999-09/msg01836.html (6,973 bytes)
- 3. Re: bad cylindar (score: 1)
- Author: Frank Clarici <spritenut@Exit109.com>
- Date: Wed, 29 Sep 1999 21:07:35 -0400
- I just had the same problem, #3 on my Sprite was not responding and I had spark and fuel. It turned out to be the exhaust valve was set too tight keeping it open causing the compression to sneek out
- /html/spridgets/1999-09/msg01839.html (7,922 bytes)
- 4. RE: bad cylindar (score: 1)
- Author: "Bill Miller" <millerb@netusa1.net>
- Date: Wed, 29 Sep 1999 21:14:32 -0500
- I had the exact same problem on the exact same cylinder! Be sure you in fact are getting spark. My problem turned out to be a bad spark plug! If you haven't yet, pull *that* plug and check it again.
- /html/spridgets/1999-09/msg01846.html (8,090 bytes)
- 5. Re: bad cylindar (score: 1)
- Author: Ron Soave <soavero@yahoo.com>
- Date: Wed, 29 Sep 1999 19:32:05 -0700 (PDT)
- Check valve clearances (if Frank didn't tell you that == Ron Soave "Drive It Like You Stole It" - WST, TT 1960 Bugeye 1972 BGT
- /html/spridgets/1999-09/msg01847.html (7,468 bytes)
- 6. Re: bad cylindar (score: 1)
- Author: Lancer7676@aol.com
- Date: Thu, 30 Sep 1999 06:38:05 EDT
- << # 4 cylindar is not responding.. switched to new plugs, new wires, new distributor cap and rotor. Take off the valve cover and check the valves and the valve train. Could be the intake valve isnt
- /html/spridgets/1999-09/msg01861.html (7,164 bytes)
This search system is powered by
Namazu