- 1. RE: bj8 locking in first: to pin or not to pin, that is (score: 1)
- Author: "Len and/or Marge" <thehartnetts@earthlink.net>
- Date: Fri, 20 Aug 2004 09:09:32 -0700
- I had this this problem a few years ago. The advise I got from the Nocks was to check and see if there was a 'pad' in the recess in the bell housing where the shifting rods go. There wasn't. I insert
- /html/healeys/2004-08/msg00484.html (9,097 bytes)
- 2. Re: bj8 locking in first: to pin or not to pin, that is (score: 1)
- Author: "BJ8Healeys" <sbyers@ec.rr.com>
- Date: Sat, 21 Aug 2004 09:45:00 -0400
- And I had the same problem, too, when I rebuilt my gearbox. There was no evidence of any kind of pad in the recesses of the bellhousing for the shifter rods, and I didn't know there should be. When I
- /html/healeys/2004-08/msg00501.html (9,835 bytes)
- 3. Re: bj8 locking in first: to pin or not to pin, that is (score: 1)
- Author: "Ron Fine Esq." <ronfineesq@earthlink.net>
- Date: Tue, 24 Aug 2004 19:54:17 -0700
- I had the exact same experience when rebuilding my gearbox on my 61BN7. I found evidence of a pad in the recesses of the bell housing and I had read about it on this list and other places but while d
- /html/healeys/2004-08/msg00642.html (9,609 bytes)
This search system is powered by
Namazu