- 1. Re: bullet connectors (score: 1)
- Author: "Paul Hunt \(T\)" <paul.hunt1@blueyonder.co.uk>
- Date: Mon, 1 Dec 2003 09:54:15 -0000
- With clean wire, new bullet, flux-cored solder, and a hot high-power iron this shouldn't be necessary, and tinning the wire first may prevent it going through the hole in the bullet. PaulH.
- /html/mgs/2003-12/msg00001.html (6,967 bytes)
- 2. Re: bullet connectors (score: 1)
- Author: "Paul Hunt \(T\)" <paul.hunt1@blueyonder.co.uk>
- Date: Mon, 1 Dec 2003 12:40:40 -0000
-
- /html/mgs/2003-12/msg00002.html (6,838 bytes)
- 3. Re: bullet connectors (score: 1)
- Author: "Eugene Balinski" <eugeneb@nni.com>
- Date: Mon, 01 Dec 2003 21:28:18 -0500
- - - SNIP - - , ...and a hot **high-power iron** A high powered soldering iron is **very** important. It is best to use an iron of 50 watts or greater, or a soldering gun (nominally 100W or greater).
- /html/mgs/2003-12/msg00018.html (7,153 bytes)
- 4. bullet connectors (score: 1)
- Author: "Richard" <ramsmgb@cox.net>
- Date: Sun, 30 Nov 2003 19:44:00 -0700
- I am sorry, but you did not have a complete description of the process. You are correct about starting with 3/8" of stripped wire. The first thing you do, is apply solder to the wire. Then, after it
- /html/mgs/2003-11/msg00612.html (6,249 bytes)
- 5. bullet connectors (score: 1)
- Author: "Steven C. Zabel" <stubalub@juno.com>
- Date: Mon, 06 Sep 1999 15:22:28 EDT
- -- Yikes! -Z
- /html/mgs/1999-09/msg00234.html (6,335 bytes)
- 6. Re: bullet connectors (score: 1)
- Author: Albert F Jones <fisher@hctc.net>
- Date: Mon, 06 Sep 1999 15:30:34 -0500
- Some of us just chose to treat that particular comment with the contempt that it deserved. Elizabeth Comfort, TX
- /html/mgs/1999-09/msg00238.html (6,682 bytes)
This search system is powered by
Namazu