Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*coil\/distributor\s+wire\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*coil\/distributor\s+wire\s*$/: 4 ]

Total 4 documents matching your query.

1. coil/distributor wire (score: 1): Author: "carolien coulter" <carolien@coastalnet.com>; Date: Mon, 23 Aug 1999 20:09:37 -0700; Hi everyone, Well tonight I discovered that one of the reasons the car won't start other than the starter is not in the car right now either) is that the wire between the coil and distributor is bad.; /html/spridgets/1999-08/msg01097.html (7,588 bytes)
2. Re: coil/distributor wire (score: 1): Author: Paul A Asgeirsson <pasgeirsson@juno.com>; Date: Mon, 23 Aug 1999 23:07:20 EDT; Hi Carol Be aware that the wire from the side of the dizzy to the points is sometimes suspect. 14 or 16 ga. on the other should be adequate. Paul PAsgeirsson@juno.com; /html/spridgets/1999-08/msg01106.html (8,399 bytes)
3. Re: coil/distributor wire (score: 1): Author: "carolien coulter" <carolien@coastalnet.com>; Date: Wed, 25 Aug 1999 13:47:36 -0700; Your were so right. It turned out to be inside the dizzy. The wire from the coil to the distributor was fine. Luckily I had not cut it off on both sides yet where it came out on each side of the har; /html/spridgets/1999-08/msg01289.html (9,226 bytes)
4. Re: coil/distributor wire (score: 1): Author: Paul A Asgeirsson <pasgeirsson@juno.com>; Date: Thu, 26 Aug 1999 15:17:39 EDT; Hi Carol, Thanks for the kudos. They're always welcome. It's kind of neat to be able to share some of the experience of years with others. Paul PAsgeirsson@juno.com; /html/spridgets/1999-08/msg01299.html (10,106 bytes)

Current List: 1 - 4
Page: [1]