- 1. corrosion controle (score: 1)
- Author: "MR VIKING" <vcviking@wildblue.net>
- Date: Mon, 15 Jan 2007 07:48:36 -0800
- What is the best coating to paint, plate, or apply to a liners frame to prevent corrosion???? Would be nice if it was easily removable to weld on those forgotten items. Have heard that even powder co
- /html/land-speed/2007-01/msg00418.html (7,123 bytes)
- 2. Re: corrosion controle (score: 1)
- Author: "Glen Barrett" <speedtimer@charter.net>
- Date: Mon, 15 Jan 2007 09:03:00 -0700
- If you log onto http://www.team.net/archive you will find lots of the LSR information listed. It may save you a lot of time in some areas during the build. We would still like you to ask questions o
- /html/land-speed/2007-01/msg00419.html (7,704 bytes)
- 3. Re: corrosion controle (score: 1)
- Author: Doug Odom <dlodom@charter.net>
- Date: Mon, 15 Jan 2007 08:41:04 -0800
- Jon, The main thing to make sure of is that the metal is properly prepared. Clean, dry, and zero rust. Then use an etching primer. I have used both DuPont and PPG and both work very well. These are t
- /html/land-speed/2007-01/msg00420.html (7,672 bytes)
- 4. Re: corrosion controle (score: 1)
- Author: "Ed Weldon" <23.weldon@comcast.net>
- Date: Mon, 15 Jan 2007 08:44:15 -0800
- Jon-- Rustoleum rusty metal primer in the regular can. It's got a fish oil base. Put it on thick with a brush. When's the last time you saw a rusty fish? Seriously, this is a tough nut to crack. The
- /html/land-speed/2007-01/msg00421.html (8,117 bytes)
- 5. Re: corrosion controle (score: 1)
- Author: "Sparky" <Sparky.2211@cox.net>
- Date: Mon, 15 Jan 2007 10:36:56 -0700
-
- /html/land-speed/2007-01/msg00429.html (7,407 bytes)
- 6. Re: corrosion controle (score: 1)
- Author: Dick J <lsr_man@yahoo.com>
- Date: Mon, 15 Jan 2007 11:31:57 -0800 (PST)
- The only solution to corrosion control from the salt is Salt-X, wash - wash - wash, and then more wash. In 2003, I sold my car while at Bonneville, but had a nice, new, empty trailer (flatbed) to tow
- /html/land-speed/2007-01/msg00442.html (8,965 bytes)
- 7. RE: corrosion controle (score: 1)
- Author: "Jim Webb" <jimwebb@nutsracing.com>
- Date: Mon, 15 Jan 2007 13:46:08 -0600
- Welcome to the list! The only paint I have found so far that will survive the salt is POR-15. It is flexible enough, resistant to chemicals and abrasion, and can easily be sanded or ground off when
- /html/land-speed/2007-01/msg00444.html (8,296 bytes)
- 8. RE: corrosion controle (score: 1)
- Author: "Clay, Dale" <Dale.Clay@mdhelicopters.com>
- Date: Mon, 15 Jan 2007 12:49:53 -0700
- Good the second time too! Dale C. Yep, no matter how hard you try, there will always be some salt hidden somewhere in the chassis. Dick J In East Texas PS, Yeah, I know. I told that story before, but
- /html/land-speed/2007-01/msg00446.html (7,306 bytes)
This search system is powered by
Namazu