- 1. door hinges (score: 1)
- Author: "Mr.Serge Berube" <serge.ber@sympatico.ca>
- Date: Fri, 4 Feb 2005 06:50:46 -0500
- The 32 bolts that hold the hinges and doors are they all same ?5/16" - 18 x 1" hex head Thanks Serge
- /html/bricklin/2005-02/msg00005.html (6,385 bytes)
- 2. Re: door hinges (score: 1)
- Author: <jblair1948@cox.net>
- Date: Fri, 4 Feb 2005 6:57:46 -0500
- Serge, The short answer is yes. However, Terry uses 2 bolts per hinge that are different. These 2 different bolts go on the door where the weather stripping would touch them. He uses a round smooth
- /html/bricklin/2005-02/msg00006.html (6,695 bytes)
- 3. Re: door hinges (score: 1)
- Author: "High Tech Coatings" <rick@hightechcoatings.com>
- Date: Fri, 4 Feb 2005 06:58:39 -0500
- Some have changed the ones in the door near the weather strip to a button head internal hex. This just makes for an easier seal. I think most only need to be 3/4" of thread. 1" may be needed if shims
- /html/bricklin/2005-02/msg00007.html (6,706 bytes)
This search system is powered by
Namazu