Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*front\s+plate\s+mounting\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*front\s+plate\s+mounting\s*$/: 7 ]

Total 7 documents matching your query.

1. front plate mounting (score: 1): Author: William Zehring <zehrinwa@UMDNJ.EDU>; Date: Tue, 17 Jun 1997 08:54:27 -0400; Fellow mog-o-philes: Does anyone out there have some advice on a means to mount a front licence plate? Some of you fellows must live in a state that requires a front plate. I really don't want to dri; /html/morgans/1997-06/msg00061.html (7,129 bytes)
2. Re: front plate mounting (score: 1): Author: RCooperman@aol.com; Date: Tue, 17 Jun 1997 10:02:06 -0400 (EDT); The previous owner of my '67 4/4 solved the front license plate mounting problem. He mounted a steel strap on either side of the front bumper at the back. They are bolted on using the inner carriage; /html/morgans/1997-06/msg00062.html (7,208 bytes)
3. Re: front plate mounting (score: 1): Author: Gary Kneisley <kneisley@ohio.net>; Date: Tue, 17 Jun 1997 11:34:09 -0400; Will, My +8 has two bolts which go through the lower corners of the grill, onto which the badge bar is attached. These same bolts hold a bracket,about 3/8 inch wide and 4-5 inches long, which bends s; /html/morgans/1997-06/msg00063.html (7,800 bytes)
4. Re: front plate mounting (score: 1): Author: steve@tap.csiro.au (Steve Moore); Date: Wed, 18 Jun 1997 08:01:32 +1000; The factory had mounted mine on two lengths of flat steel attached to the inner bolt on either side of the bumper mount (where the mount attaches to the bumper) down to the top corners of the licenc; /html/morgans/1997-06/msg00065.html (7,890 bytes)
5. Re: front plate mounting (score: 1): Author: gdm@po.cwru.edu (David McCoy); Date: Tue, 17 Jun 1997 18:35:44 -0400 (EDT); Will I have a holder attached to my front bumper Dave G. David McCoy, PhD phone: (216) 368-5963 Department of Environmental Health Sciences fax: (216) 368-3194 Case Western Reserve University email:; /html/morgans/1997-06/msg00066.html (7,221 bytes)
6. Re: front plate mounting (score: 1): Author: Jeremy Edwards <jeremy@jmemee.demon.co.uk>; Date: Tue, 17 Jun 1997 21:08:55 +0100; In the UK, we have to mount a front number plate and the factory provide some steel strips with holes in that go over the bumper over-rider bolts. A UK number plate is a little longer than the US equ; /html/morgans/1997-06/msg00067.html (7,997 bytes)
7. RE: front plate mounting (score: 1): Author: Simon J Orebi Gann <simonog@avnet.co.uk>; Date: Thu, 19 Jun 1997 08:19:42 +0100; The reason the front number plate comes off for racing (still) is that = the best place to put the oil cooler is just behind the number plate. = During road use, it isn't needed, and the number plate; /html/morgans/1997-06/msg00087.html (8,616 bytes)

Current List: 1 - 7
Page: [1]