- 1. high speed miss (score: 1)
- Author: "Lonn and Rhonda" <hoops@owt.com>
- Date: Fri, 8 Sep 2000 08:32:18 -0700
- Our 70 BGT has suddenly developed a problem. At low speeds, even under heavy acceleration, it runs fine. But try to accelerate beyond about 3000 rpm and it starts missing and tops out at about 4000 r
- /html/mgs/2000-09/msg00311.html (7,117 bytes)
- 2. Re: high speed miss (score: 1)
- Author: Ajhsys@aol.com
- Date: Fri, 8 Sep 2000 13:58:01 EDT
- << Our 70 BGT has suddenly developed a problem. At low speeds, even under heavy acceleration, it runs fine. But try to accelerate beyond about 3000 rpm and it starts missing and tops out at about 400
- /html/mgs/2000-09/msg00314.html (7,030 bytes)
- 3. Re: high speed miss (score: 1)
- Author: <paul.hunt1@virgin.net>
- Date: Fri, 8 Sep 2000 19:15:44 +0100
- Did you set the points to the recommended figure? have you checked them with a dwell meter? An excessive gap will cause a high speed/heavy load misfire. You can check the condenser by removing the di
- /html/mgs/2000-09/msg00319.html (8,303 bytes)
This search system is powered by
Namazu