- 1. horn blowing fuses (score: 1)
- Author: Lizirbydavis@cs.com
- Date: Thu, 10 Aug 2006 20:34:27 EDT
- Everytime I hit the horn, the fuse blows. The system has historically worked fine since installing two new horns from moss and a new relay. I feel the relay vibrating, and buzzing, but nothing whatso
- /html/6pack/2006-08/msg00064.html (6,925 bytes)
- 2. RE: horn blowing fuses (score: 1)
- Author: "Navarrette, Vance" <vance.navarrette@intel.com>
- Date: Fri, 11 Aug 2006 08:16:21 -0700
- The important thing is to be systematic in your trouble shooting. It is impossible to give much in the way of specifics since your wiring is so non-standard. I would first disconnect the connections
- /html/6pack/2006-08/msg00068.html (8,106 bytes)
- 3. Re: horn blowing fuses (score: 1)
- Author: "oliver" <sumton@sbcglobal.net>
- Date: Fri, 11 Aug 2006 13:42:12 -0500
- OK. this must sound really dumb, but here goes: is there a way to measure with a multi meter? if the voltage (did i get that right?) is going to blow a fuse? i've been in this place before, and wasn'
- /html/6pack/2006-08/msg00070.html (7,071 bytes)
- 4. RE: horn blowing fuses (score: 1)
- Author: "im sloane" <im_sloane@hotmail.com>
- Date: Fri, 11 Aug 2006 18:59:47 +0000
- Not an electrician, but had good luck with trial and error. Horn relay get's ground from horn-button. Relay getting ground then sends +12v to the horns. You should be able to identify the wires on t
- /html/6pack/2006-08/msg00071.html (7,589 bytes)
- 5. Re: horn blowing fuses (score: 1)
- Author: Lizirbydavis@cs.com
- Date: Sun, 13 Aug 2006 17:30:14 EDT
- thanks to all who offered advice about my horn fuse blowing problem. It turns out that the right side horn had become lose on it's bracket. It was flopping around and shorting out against my metal ra
- /html/6pack/2006-08/msg00084.html (6,779 bytes)
This search system is powered by
Namazu