- 1. how to weld stainless steel? (score: 1)
- Author: "Big Sixer" <healey@ledwith.com>
- Date: Sat, 22 May 2004 20:13:57 -0400
- I just broke a weld on my (new) stainless steel exhaust. It is the little 3" piece which connects the two out pipes about 6" in front of the end tips. Can I use a MIG welder? Is the wire stainless st
- /html/healeys/2004-05/msg00575.html (6,954 bytes)
- 2. Re: how to weld stainless steel? (score: 1)
- Author: "James Lea" <clocks@midcoast.com>
- Date: Sat, 22 May 2004 21:12:09 -0400
- Ryan. I am not sure about MIG but I just welded my stainless tailpipe bracket with a stainless rod and a buzz box. Worked fine.Don't turn it up past 60 though. The metal is pretty thin. JL James Lea
- /html/healeys/2004-05/msg00582.html (6,987 bytes)
- 3. RE: how to weld stainless steel? (score: 1)
- Author: "Peter Schauss" <schauss@worldnet.att.net>
- Date: Sat, 22 May 2004 23:26:07 -0400
- When mine broke I used my MIG welder with regular wire. I have had to repair the same piece on mine twice since I installed the system eight years ago. My most recent repair (with standard MIG wire)
- /html/healeys/2004-05/msg00585.html (7,685 bytes)
- 4. Re: how to weld stainless steel? (score: 1)
- Author: GSFuqua1@aol.com
- Date: Sun, 23 May 2004 00:55:57 EDT
- Ryan, you can weld SS with a MIG and regular wire BUT there are differences and there is specific wire for the MIG for SS. You should also use a little different mixture of gas shielding. I think rat
- /html/healeys/2004-05/msg00588.html (7,325 bytes)
- 5. RE: how to weld stainless steel? (score: 1)
- Author: "Greg Wilkinson" <gregwilkinson@adelphia.net>
- Date: Sun, 23 May 2004 08:39:54 -0700
- Hi Ryan, You can weld stainless with regular MIG wire, but it will rust over time. I have seen stainless MIG wire in the 4" spools. You could ask your welding shop if you can get by with the CO2/AR m
- /html/healeys/2004-05/msg00593.html (7,552 bytes)
This search system is powered by
Namazu