- 1. intake gasket glue (score: 1)
- Author: "Scott Cowle" <SCowle@mentorcollege.edu>
- Date: Mon, 27 Jun 2005 12:27:25 -0400
- I have taken the driver's side head off my engine and the piston is broken-the head and cylinder wall are miraculously undamaged. The only cause i can think off as to why this cylinder let go when th
- /html/land-speed/2005-06/msg00247.html (8,057 bytes)
- 2. Re: intake gasket glue (score: 1)
- Author: LGMCAFEE@aol.com
- Date: Mon, 27 Jun 2005 13:42:43 EDT
- A friend of mine that does drag racing thinks the gasket sealer called The Right Stuff by permatex is the best thing going. I bought some for the assemble of our outboard race motor but I haven't run
- /html/land-speed/2005-06/msg00248.html (6,965 bytes)
- 3. RE: intake gasket glue (score: 1)
- Author: "Albaugh, Neil" <albaugh_neil@ti.com>
- Date: Mon, 27 Jun 2005 13:08:40 -0500
- I wouldn't rely on gasket sealer to fix your problem; it's going to take resurfacing your block & heads to get everything flat so a head gasket will seal properly. Use the proper tightening sequence
- /html/land-speed/2005-06/msg00251.html (8,194 bytes)
- 4. Re: intake gasket glue (score: 1)
- Author: Nt788@aol.com
- Date: Mon, 27 Jun 2005 14:30:38 EDT
- This type of detail, is more important than big dyno numbers! Its something I'm trying to learn! Jack
- /html/land-speed/2005-06/msg00252.html (7,121 bytes)
- 5. Re: intake gasket glue (score: 1)
- Author: Doug Odom <dlodom@charter.net>
- Date: Mon, 27 Jun 2005 13:31:02 -0700
- Scott, You will that everyone has their own favorite type of adhesives. I guess it comes from personal experience and if it works don't change. I myself like the Permatex Hylomar for the intake gaske
- /html/land-speed/2005-06/msg00257.html (8,454 bytes)
- 6. RE: intake gasket glue (score: 1)
- Author: "Albaugh, Neil" <albaugh_neil@ti.com>
- Date: Mon, 27 Jun 2005 21:05:49 -0500
- I mis- read Scotts message and thought he said that his head gasket was the one that was leaking-- never mind. I'll second the Hylomar recommendation, though. Regards, Neil Tucson, AZ --Original Mess
- /html/land-speed/2005-06/msg00259.html (8,998 bytes)
- 7. Re: intake gasket glue (score: 1)
- Author: tclouser@purdue.edu
- Date: Tue, 28 Jun 2005 00:09:56 -0500
- Try using some of Edelbrock's gasgacinch, should help.
- /html/land-speed/2005-06/msg00262.html (6,765 bytes)
This search system is powered by
Namazu