- 1. kingpin to spindle arm shim (score: 1)
- Author: Patton Dickson <kpatton@worldnet.att.net>
- Date: Sat, 10 Jan 1998 14:20:18 -0600
- Hey everybody, Today the front suspension was supposed to go back on, but I have come across another glitch. When I tighten the king pin nut down, the spindles will not turn. After a few of us (it wa
- /html/mgs/1998-01/msg00728.html (8,327 bytes)
- 2. Re: kingpin to spindle arm shim (score: 1)
- Author: Art Pfenninger <ch155@FreeNet.Buffalo.EDU>
- Date: Sat, 10 Jan 1998 15:30:35 -0500 (EST)
- You may want to try an industrial supply house and ask them if they if they carry brass shim material. I have some .004 made by PSW company. Mill wrights use the stuff. I could send you some of the .
- /html/mgs/1998-01/msg00729.html (9,079 bytes)
- 3. Re: kingpin to spindle arm shim (score: 1)
- Author: Mike Lishego <mikesl@tartan.sapc.edu>
- Date: Sat, 10 Jan 1998 15:51:36 -0800
- Now that you mention it, I remember seeing several hobby shops with small brass sheets in varying thickness. I think it might cost between .50 - $4.00, depending on how much you need and the size. I'
- /html/mgs/1998-01/msg00730.html (7,524 bytes)
- 4. Re: kingpin to spindle arm shim (score: 1)
- Author: "Hal Cummings"<halc@mazda.genauto.com>
- Date: Mon, 12 Jan 98 09:32:18 -0500
- I rebuilt the front suspension on my 71 Midget and ran up against this problem too. The rebuild kit came with all the required components. I had the kingpin bushes replaced and reamed to size by a sh
- /html/mgs/1998-01/msg00803.html (10,096 bytes)
- 5. RE: kingpin to spindle arm shim (score: 1)
- Author: "REICHLE, CHRISTOPHER" <CREICHLE@nsc.msmail.miami.edu>
- Date: Mon, 12 Jan 1998 12:08:00 -0800 (PST)
- Have you tried Seven Enterprises? You could also pull them off a used kingpin set. You need to use the proper number of shims so that there is no play but the swivel arm still moves with some resista
- /html/mgs/1998-01/msg00806.html (8,896 bytes)
This search system is powered by
Namazu