Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*leaf\s+spring\s+problems\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*leaf\s+spring\s+problems\s*$/: 7 ]

Total 7 documents matching your query.

1. leaf spring problems (score: 1): Author: Daniel Thompson <dthompso@total.net>; Date: Wed, 14 Oct 1998 21:22:51 -0400; Starting now to sandblast, paint and re-assemble components of the '58 Bugeye. I took a close look at my leaf springs for the first time since taking them off the car a year ago. On one side, here's; /html/spridgets/1998-10/msg00346.html (8,354 bytes)
2. Re: leaf spring problems (score: 1): Author: "Mike Gigante" <mikeg@vicnet.net.au>; Date: Thu, 15 Oct 1998 13:08:17 -0700; I wouldn't be welding spring steel. At best it'll lose its temper. While you can get replacement standard springs, I'll repeat my previous advice to this list - go to a springmaker, take your old spr; /html/spridgets/1998-10/msg00353.html (9,464 bytes)
3. Re: leaf spring problems (score: 1): Author: GMari58175@aol.com; Date: Thu, 15 Oct 1998 05:11:01 EDT; << Anyone have a real good used set with 15 leaves, or an NOS set? Can I buy some not-so-good used sets and mix and match to get the best combination? >> Hi Daniel, I have a good used set, but haven'; /html/spridgets/1998-10/msg00365.html (7,496 bytes)
4. Re: leaf spring problems (score: 1): Author: "Alan Inglis" <ainglis@bcresearch.com>; Date: Thu, 15 Oct 1998 09:20:01 -0700; I have been lusting after the competition 1/4 rear springs listed in the Mini Mania catalogue: fewer leafs, less weight, same spring rate and 20% softer. Sounds too good to be true. Anyone tried them; /html/spridgets/1998-10/msg00370.html (8,645 bytes)
5. Re: leaf spring problems (score: 1): Author: Frank Clarici <spritenut@Exit109.com>; Date: Thu, 15 Oct 1998 16:39:00 -0400; That's a fact George. -- Frank Clarici Toms River, NJ Lots of LBCs http://www.exit109.com/~spritenut; /html/spridgets/1998-10/msg00384.html (7,922 bytes)
6. Re: leaf spring problems (score: 1): Author: J6879758@emu.bendigo.latrobe.edu.au; Date: Fri, 16 Oct 1998 12:46:12 +1000; May I ask, who is the spring guy? Can he do 1/4 elliptics too? Mine are a bit on the 'saggy' side. Andy `orig msg`; /html/spridgets/1998-10/msg00402.html (8,548 bytes)
7. Re[2]: leaf spring problems (score: 1): Author: Bob@itgonline.com (Bob); Date: Fri, 16 Oct 1998 09:10:40 -0400; I am currently running the new competition springs, they are great, I also run the Koni shocks on the rear. They are adjustable and needed to be stiffened up a bit. I used to have the 1970's version; /html/spridgets/1998-10/msg00416.html (9,004 bytes)

Current List: 1 - 7
Page: [1]