- 1. new rear harness and lighting trouble (score: 1)
- Author: William Killeffer <wtkilleffer@yahoo.com>
- Date: Sun, 24 Feb 2002 19:01:34 -0500
- Hello listers, I installed a new rear wiring harness from Victoria British today. The quality is good and everything back there works better now, but there is one problem. Something is wrong with the
- /html/mgs/2002-02/msg00711.html (7,889 bytes)
- 2. Re: new rear harness and lighting trouble (score: 1)
- Author: "Hans Duinhoven" <h.duinhoven@planet.nl>
- Date: Mon, 25 Feb 2002 08:54:46 +0100
- Hi William, Trace the specific wires back to the bullet group connector where all left and right wires come together. There should be a fault. It will be either the bullet connector itself carrying a
- /html/mgs/2002-02/msg00725.html (9,300 bytes)
- 3. Re: new rear harness and lighting trouble (score: 1)
- Author: <paul.hunt1@virgin.net>
- Date: Mon, 25 Feb 2002 09:10:00 -0000
- The two sides are fused seperately, there are two red wires that come to the back, one for each side. If the front that side is working OK then check the appropriate red wire at the fusebox (3rd fus
- /html/mgs/2002-02/msg00727.html (7,964 bytes)
- 4. Re: new rear harness and lighting trouble (score: 1)
- Author: Rocky Frisco <rock@rocky-frisco.com>
- Date: Tue, 26 Feb 2002 04:42:15 -0600
- Might be a bad ground. Run an extra wire all the way from the battery ground post to the ground of the light cluster. If it starts working right, there's your answer. -Rock http://www.rocky-frisco.co
- /html/mgs/2002-02/msg00752.html (8,724 bytes)
This search system is powered by
Namazu