Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*oil\s+pump\s+priming\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*oil\s+pump\s+priming\s*$/: 6 ]

Total 6 documents matching your query.

1. oil pump priming (score: 1): Author: "healeymanjim@joimail.com" <healeymanjim@joimail.com>; Date: Tue, 6 Feb 2007 21:00:37 -0800; finally got around to spinning the engine on the bn6. cranked it for a while but no oil came out of the tube that feeds the oil pressure guage. the engine has been sitting quite a while so the oil i; /html/healeys/2007-02/msg00170.html (7,051 bytes)
2. RE: oil pump priming (score: 1): Author: "Freese, Ken" <Kendall.Freese@Aerojet.com>; Date: Wed, 7 Feb 2007 08:43:30 -0800; One sure fire way was to pack the oil pump with vaseoline before you put the oil pan on. I hope you hear of another way post pan installation. Ken Freese 65 BJ8 -; /html/healeys/2007-02/msg00190.html (6,637 bytes)
3. RE: oil pump priming (score: 1): Author: "Ron Davies" <rdavies1@cox.net>; Date: Wed, 7 Feb 2007 16:58:26 -0800; I went through this several years ago and it might still be in the archives. Rule #1. If you remove the pan, get it back on in an hour or so, not in a few days while waiting for the missing bolt not; /html/healeys/2007-02/msg00206.html (7,000 bytes)
4. oil pump priming (score: 1): Author: "andy pole" <ampole@hotmail.com>; Date: Sat, 19 May 2007 06:18:42 +0000; Just read something in my latest Practical Classics magazine and wondered if it was a good idea? Their tip for priming was to pack your new oil pump with petroleum jelly which would dissolve and cir; /html/healeys/2007-05/msg00491.html (6,727 bytes)
5. Re: oil pump priming (score: 1): Author: Chris Tucker <list@mysystemadmin.com>; Date: Fri, 18 May 2007 23:22:15 -0700; Engine assembly lube should work well and is thin enough to dissolve quickly. Chris; /html/healeys/2007-05/msg00492.html (6,751 bytes)
6. Re: oil pump priming (score: 1): Author: Norman Nock <sjnnock@sbcglobal.net>; Date: Sat, 19 May 2007 19:25:12 -0700 (PDT); You should have filled the oil pump with grease , but if you add the oil to your engine now the oil will slowly find its way into the gears of the pump in a few days crank it to see if the oil comes; /html/healeys/2007-05/msg00512.html (7,721 bytes)

Current List: 1 - 6
Page: [1]