- 1. parts cleaner (score: 1)
- Author: "James Laukaitis" <jim5@us.ibm.com>
- Date: Thu, 17 Jan 2002 10:35:13 -0500
- I am rebuilding my SUs and don't have a parts washer. What are other solutions :) have you listers have come up with? Just soap and water? Paint thinner? Also some of the surfaces where there were ga
- /html/mgs/2002-01/msg00625.html (7,047 bytes)
- 2. Re: parts cleaner (score: 1)
- Author: "Lawrie Alexander" <Lawrie@britcars.com>
- Date: Thu, 17 Jan 2002 08:19:06 -0800
- Many auto parts stores sell a quart (or thereabouts) can of Berryman's carburetor cleaner. It's big enough to put the bodies, bowls, etc, in (not all at once, but you're probably keeping the pieces s
- /html/mgs/2002-01/msg00627.html (7,675 bytes)
- 3. Re: parts cleaner (score: 1)
- Author: Bullwinkle <yd3@nvc.net>
- Date: Thu, 17 Jan 2002 10:32:43 -0600
- For many years we used a deep pan on the work bench filled with kerosene, diesel fuel, or home heating oil. (Before we knew better we used gasoline, but it is very hazardous.) The best pan I found f
- /html/mgs/2002-01/msg00629.html (8,609 bytes)
- 4. Re: parts cleaner (score: 1)
- Author: "Rick Lindsay" <ROLindsay@Emeraldgrc.com>
- Date: Thu, 17 Jan 2002 11:08:00 -0600
- I have been intending to get a NEW stainless steel rectangular cake pan -- the kind with an aluminum slide-on lid -- from a commercial kitchen supply! It won't seal but it will help avoid some spill
- /html/mgs/2002-01/msg00630.html (7,168 bytes)
- 5. Re: parts cleaner (score: 1)
- Author: "David Hill" <davhill@btinternet.com>
- Date: Thu, 17 Jan 2002 17:51:50 -0000
- Hi all, Just a couple of refinements on this issue: If you have a deepish parts cleaning tank, you can make it recycle. Just rig up a 5/16 inch outlet tube about 1 inch from the bottom of the tank an
- /html/mgs/2002-01/msg00633.html (7,545 bytes)
This search system is powered by
Namazu