- 1. Rear Wheel Cylinder Problem (score: 1)
- Author: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
- Date: Sat, 3 Jun 2006 23:16:41 -0400
- I just installed a new rear wheel cylinder along with new retaining clips and a rubber boot on my BT7. It appears that the boot goes on first then the "bent end clip" and then the straight retaining
- /html/healeys/2006-06/msg00054.html (7,623 bytes)
- 2. Re: Rear Wheel Cylinder Problem (score: 1)
- Author: "Greg Lemon" <glemon@neb.rr.com>
- Date: Sat, 3 Jun 2006 22:51:54 -0500
- I think this is OK, it just needs to be able to center itself a little as brakes are applied, and there is enough force to do this even if it is a little tight. That is my theory anyway. In my experi
- /html/healeys/2006-06/msg00056.html (7,040 bytes)
- 3. Re: Rear Wheel Cylinder Problem (score: 1)
- Author: Dave & M <rusd@velocitus.net>
- Date: Sat, 03 Jun 2006 22:26:43 -0700
- Hi Mark, I believe that you have the boot in the wrong place. You are right, things can't slide with the rubber under the plate nearest the backing plate. I think this is how it goes together. Slide
- /html/healeys/2006-06/msg00057.html (8,606 bytes)
- 4. Re: Rear Wheel Cylinder Problem (score: 1)
- Author: "Martin Heim" <bn4@onlinehome.de>
- Date: Sun, 4 Jun 2006 11:32:18 +0200
- Hi Mark, the assembly sequence is really tricky IMHO. Only after receiving some copies of origional Girling maintenance sheets I understood what to do (I'm an engineer and have usually a lot to do to
- /html/healeys/2006-06/msg00060.html (8,372 bytes)
- 5. Rear Wheel Cylinder Problem (score: 1)
- Author: "Martin Heim" <bn4@onlinehome.de>
- Date: Sun, 4 Jun 2006 15:37:50 +0200
- Hi Bob (3x), Sven and Magnus, included the pictures. One of the "shims" shown in the pictures is of no use for our Healeys. When to fit the lever is the important point. It's a bit tight but some for
- /html/healeys/2006-06/msg00063.html (8,155 bytes)
- 6. Re: rear wheel cylinder problem (score: 1)
- Author: John Loftus <loftusdesign@cox.net>
- Date: Sun, 04 Jun 2006 09:07:46 -0700
- Hi Mark, I just did this job yesterday on my BJ7 and struggled at first because I had taken the parts out 3 years ago and forgot exactly how they went back in. I installed them wrong first and the ru
- /html/healeys/2006-06/msg00065.html (7,902 bytes)
This search system is powered by
Namazu