- 1. rotor help (score: 1)
- Author: Tyson Sherman <tsherman@tecinfo.com>
- Date: Fri, 13 Mar 1998 21:22:13 -0600
- Does anyone have a spare rotor around? I bought one today for my 76 `B, and it seems to be 180 degrees off. I need to know if the indentation inside the rotor is on the same side that the rotor point
- /html/mgs/1998-03/msg00900.html (6,868 bytes)
- 2. Re: rotor help (score: 1)
- Author: gofastmg@juno.com (Rick Morrison)
- Date: Sun, 15 Mar 1998 00:39:51 EST
- 180 degrees different. The rotor contact faces away from the alignment Rick Morrison 72 MGBGT 74 Midget On Fri, 13 Mar 1998 21:22:13 -0600 Tyson Sherman <tsherman@tecinfo.com> writes:
- /html/mgs/1998-03/msg01009.html (7,199 bytes)
- 3. Re: rotor help (score: 1)
- Author: Tyson Sherman <tsherman@tecinfo.com>
- Date: Sun, 15 Mar 1998 00:27:56 -0600
- THANKS Rick (and Larry). Now I know whether I need to reverse my plug leads, or if the locally sourced rotor is wrong. -- Tyson Sherman http://www.tecinfo.com/~tsherman
- /html/mgs/1998-03/msg01016.html (7,052 bytes)
- 4. Re: rotor help (score: 1)
- Author: Charles & Peggy Robinson <ccrobins@ktc.com>
- Date: Sun, 15 Mar 1998 01:11:02 -0800
- Are you serious? CR
- /html/mgs/1998-03/msg01019.html (6,600 bytes)
- 5. Re: rotor help (score: 1)
- Author: gofastmg@juno.com (Rick Morrison)
- Date: Sun, 15 Mar 1998 23:10:16 EST
- If the rotor contact and the alignment tab are on the same side, then the rotor you have is incorrect To get the plug wire orientation correct, bring #1 cylinder up on compression. Check by holding a
- /html/mgs/1998-03/msg01097.html (8,204 bytes)
- 6. Re: rotor help (score: 1)
- Author: Trevor Boicey <tboicey@brit.ca>
- Date: Mon, 16 Mar 1998 04:24:03 -0500
- Actually Tyson, I don't know about a 45D, but with a 25D distributor you can take off the points, take off the contact cam, open the screw in the end of the shaft, pull out the cam, and rotate it 18
- /html/mgs/1998-03/msg01114.html (7,108 bytes)
This search system is powered by
Namazu