- 1. tr3/4 axles (score: 1)
- Author: Ted Schumacher <tedtsimx@bright.net>
- Date: Wed, 17 Sep 1997 21:59:48 -0400
- hello again. sorry for not making the axle announcement(?) clear. the axle price includes a new custom made hub and axle shaft. the hub is drilled for standard studs but none are installed so those w
- /html/fot/1997-09/msg00028.html (7,463 bytes)
- 2. RE: tr3/4 axles (score: 1)
- Author: Bill Babcock <BillB@bnj.com>
- Date: Thu, 18 Sep 1997 08:18:13 -0700
- This sounds great Ted. Count me in for a pair. Let me know when you need the money. Bill
- /html/fot/1997-09/msg00029.html (8,139 bytes)
- 3. RE: tr3/4 axles (score: 1)
- Author: Alexander Joseph H <AlexanderJosephH@Waterloo.deere.com>
- Date: Thu, 18 Sep 1997 13:01:19 -0500
- There seems to be two axle projects going on. Perhaps there needs to be a 'project coordinator' to evaluate the alternatives...both quantitative & qualitative. (This assumes the 'full floating axle"
- /html/fot/1997-09/msg00030.html (9,359 bytes)
- 4. RE: tr3/4 axles (score: 1)
- Author: Chip Bond <spirals@esinet.net>
- Date: Thu, 18 Sep 1997 16:28:23 -0400
- Hi all, Ted contacted me a couple weeks ago and indicated he was working on a related project. He politley asked that I "drag my feet" a bit while he gets his ends of things together. And with the se
- /html/fot/1997-09/msg00033.html (10,608 bytes)
- 5. RE: tr3/4 axles (score: 1)
- Author: R John Lye <rjl6n@uva.pcmail.virginia.edu>
- Date: Thu, 18 Sep 97 17:20:52 EDT
- Maybe - I'm not sure yet. Two points worth mentioning here: First, someone (I'll not mention names since I don't have permission to do so) reminded me that the original TR-2/early 3 axles were spline
- /html/fot/1997-09/msg00034.html (7,523 bytes)
- 6. Re: tr3/4 axles (score: 1)
- Author: Ted Schumacher <tedtsimx@bright.net>
- Date: Thu, 18 Sep 1997 21:24:10 -0400
- joe, the axles that chip is talking about and the axles i propose are the same basic product. the difference is strictly in the addition of the splined axle end and the splined hub. axles are heat tr
- /html/fot/1997-09/msg00035.html (10,631 bytes)
- 7. Re: tr3/4 axles (score: 1)
- Author: emanteno@ix.netcom.com
- Date: Fri, 19 Sep 1997 06:55:08 -0500
- Ted, During this project, there has been some suggestion that perhaps the taper in the stock axles was their weak point. Do your axles have a taper, or is that eliminated by the splined hubs? Irv
- /html/fot/1997-09/msg00036.html (7,115 bytes)
This search system is powered by
Namazu