Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*turn\s+signals\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*turn\s+signals\s*$/: 6 ]

Total 6 documents matching your query.

1. Turn signals (score: 1): Author: TRIPPY <RTRIPLETT@FAB9.intel.com>; Date: Fri, 27 Feb 98 04:26:59 PST; My '74 Midget has a faulty turn-signal unit. It works when actuated but will not return to it's off position after the appropriate turn. It does appear to try to return to the off position, as I can; /html/spridgets/1998-02/msg00670.html (7,530 bytes)
2. Re: Turn signals (score: 1): Author: Jeff Sharpe <jsharpe@501studios.com>; Date: Fri, 27 Feb 1998 08:44:49 -0500; On our '71 B there's a metal clip with a raised area snapped on the steering column. With the steering wheel in the straight ahead position, the raised area of this clip is centered in the yoke of th; /html/spridgets/1998-02/msg00675.html (8,392 bytes)
3. turn signals (score: 1): Author: Unknown; Date: Tue, 14 Jun 2005 21:23:08 -0500; Well tonight the turn signals stopped working ..all wires seem attached ...whats first on the list of what to look at or replace??? Jerry G 59BE; /html/spridgets/2005-06/msg00311.html (6,117 bytes)
4. Re: turn signals (score: 1): Author: Unknown; Date: Wed, 15 Jun 2005 19:05:58 -0400; Check the fuse, if the fuel gauge quit at the same time, it's the fuse. It might just be a dirty fuse, steel wool those fuses every 20 years or so ;) If the fuse is good, it might be the switch itsel; /html/spridgets/2005-06/msg00314.html (7,402 bytes)
5. Turn Signals (score: 1): Author: Unknown; Date: Thu, 07 Oct 2004 10:29:44 -0700; Need any suggestions as to where to start with turn signals. Always on, on one side! Turn signals were working fine last weekend when drove bugeye to San Diego British Car show on Sunday (friend I ca; /html/spridgets/2004-10/msg00140.html (7,324 bytes)
6. Re: Turn Signals (score: 1): Author: Unknown; Date: Thu, 7 Oct 2004 14:18:07 -0700; You have a "short" somewhere that is completing the circuit. I would check at the bulb socket first and make sure everything is as it should be and then at the switch. I seem to remember you have so; /html/spridgets/2004-10/msg00145.html (8,577 bytes)

Current List: 1 - 6
Page: [1]