- 1. [Fot] Fwd: 89MM head gaskets (score: 1)
- Author: Joe Alexander <n197tr4@cs.com>
- Date: Thu, 29 Aug 2013 14:47:05 -0500
- Mark Macy of Macy's Garage is looking for a gasket for 89 mm conversion. The Protrusion he mentions, I assume to be 3-4 thousandths. What do you 89 mm racers use? Thanks! Sent from my iPad Begin forw
- /html/fot/2013-08/msg00293.html (9,090 bytes)
- 2. Re: [Fot] Fwd: 89MM head gaskets (score: 1)
- Author: "MadMarx" <tr4racing@googlemail.com>
- Date: Thu, 29 Aug 2013 22:43:28 +0200
- I would say....3-4mm is way too much as this is 0.118"-0.157" If this is just a point failure and the number is 0.04mm then you should be okay. I always use sealant with the head gasket Locktite 518
- /html/fot/2013-08/msg00297.html (10,569 bytes)
- 3. Re: [Fot] Fwd: 89MM head gaskets (score: 1)
- Author: "Tylerpthompson@yahoo.com" <Tylerpthompson@yahoo.com>
- Date: Thu, 29 Aug 2013 21:44:17 -0600
- Standard Payen AE330 seems to have worked fine for me. Don't cut it...just use as is. Ty Tyler Thompson l National Account Executive - Public Safety Sector esri | One International Court | Broomfield
- /html/fot/2013-08/msg00303.html (11,152 bytes)
- 4. Re: [Fot] Fwd: 89MM head gaskets (score: 1)
- Author: "Tylerpthompson@yahoo.com" <Tylerpthompson@yahoo.com>
- Date: Thu, 29 Aug 2013 21:48:38 -0600
- I recall 3-5 thousands protrusion...Sounds too high... Ty Tyler Thompson l National Account Executive - Public Safety Sector esri | One International Court | Broomfield, CO 80021 Phone: 303.449-7779
- /html/fot/2013-08/msg00304.html (12,807 bytes)
This search system is powered by
Namazu