- 1. [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: "R. John Lye via Fot" <fot@autox.team.net>
- Date: Tue, 02 Feb 2021 15:13:38 -0500 reip=0.000, cl=1, cld=1, fgs=0
- Hi all, I have recently had to install and remove a header several times for my TR-3A, and discovered that the Moss Motors "high performance" intake/exhaust manifold gasket had disintegrated, despite
- /html/fot/2021-02/msg00003.html (9,662 bytes)
- 2. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: John Linney via Fot <fot@autox.team.net>
- Date: Tue, 2 Feb 2021 12:20:25 -0800
- I got mine from The Roadster Factory and itâ??s been great, though I suspect they arenâ??t meant to be reused as they crush to achieve their seal. _______________________________________________ fot@
- /html/fot/2021-02/msg00004.html (10,978 bytes)
- 3. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: vfracing--- via Fot <fot@autox.team.net>
- Date: Tue, 2 Feb 2021 20:38:23 +0000 (UTC)
- --==9152112114992025328== boundary="--=_Part_1196001_1131749517.1612298303689" --=_Part_1196001_1131749517.1612298303689 Content-Transfer-Encoding: quoted-printable Yes, they are pretty much a one-ti
- /html/fot/2021-02/msg00006.html (20,359 bytes)
- 4. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: Michael Moore via Fot <fot@autox.team.net>
- Date: Tue, 2 Feb 2021 20:42:05 +0000
- I have not had those problems with the high-performance set, but I donâ??t reuse them. I have not used Remflex, the they say they can be reused. But they are not cheap, thatâ??s why I but a lot of th
- /html/fot/2021-02/msg00007.html (13,920 bytes)
- 5. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: Joe Alexander via Fot <fot@autox.team.net>
- Date: Tue, 2 Feb 2021 14:51:51 -0600
- We have REMFLEX in stock and discounted. Joe Alexander 4505 Donald Dr Cedar Falls, IA 50613 The-vintage-racer.com Gasketinnovations.com Cell: 319.464.4711 ____________________________________________
- /html/fot/2021-02/msg00008.html (13,536 bytes)
- 6. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: "R. John Lye via Fot" <fot@autox.team.net>
- Date: Tue, 02 Feb 2021 16:00:25 -0500
- Thanks for all the good ideas folks. I think that I am going to try the Remflex gaskets. If they are good enough for Joe Alexander, they should be a good product. Thanks, John  Hi all, I have rec
- /html/fot/2021-02/msg00009.html (10,860 bytes)
- 7. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: Tony Drews via Fot <fot@autox.team.net>
- Date: Tue, 2 Feb 2021 15:06:10 -0600
- I use Remflex in my TR-4 because I need the gap sealing characteristics. I make my own from sheet material they sell because the intake manifold holes on the pre-cut ones are too large for my use
- /html/fot/2021-02/msg00010.html (13,779 bytes)
- 8. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: Joe Alexander via Fot <fot@autox.team.net>
- Date: Tue, 2 Feb 2021 15:10:53 -0600
- Sean Alexander is using them and has them in stock at a discount. I am trying to be retired. Joe Alexander 4505 Donald Dr Cedar Falls, IA 50613 The-vintage-racer.com Gasketinnovations.com Cell: 319.4
- /html/fot/2021-02/msg00011.html (12,357 bytes)
- 9. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: Greg Blake via Fot <fot@autox.team.net>
- Date: Tue, 2 Feb 2021 17:54:38 -0600
- I got tired of the stuff commercially available (to be fair hadnâ??t tried anything from Joe so his might be great too). I decided to go to a supplier of graphite composite gaskets used in the oil an
- /html/fot/2021-02/msg00016.html (11,941 bytes)
- 10. Re: [Fot] Intake/Exhaust manifold gasket (score: 1)
- Author: Scott Janzen via Fot <fot@autox.team.net>
- Date: Tue, 2 Feb 2021 20:28:23 -0500
- --==5334489865502015613== boundary="Apple-Mail=_3DF685B1-FA24-45F5-9132-486098EF8B04" --Apple-Mail=_3DF685B1-FA24-45F5-9132-486098EF8B04 Content-Transfer-Encoding: quoted-printable charset=utf-8 i=E2
- /html/fot/2021-02/msg00017.html (19,798 bytes)
This search system is powered by
Namazu