- 1. [Fot] Speedster pressure (score: 1)
- Author: spiwakd at aol.com (spiwakd at aol.com)
- Date: Mon, 27 Aug 2018 20:36:02 -0400
- I'm off to Lime Rock Historics this week with my TR4 and new Speedsters. I already got bumped to a faster group and won't have time to experiment, so I'm hoping someone will give me tire pressures. I
- /html/triumphs/2018-08/msg00401.html (7,566 bytes)
- 2. [Fot] Speedster pressure (score: 1)
- Author: tony at tonydrews.com (Tony Drews)
- Date: Tue, 28 Aug 2018 00:17:38 -0500
- I used about 25 psi cold (26 front / 24 rear).? Factory recommends a bit less. Regards, Tony Drews -- next part -- An HTML attachment was scrubbed... URL: <http://autox.team.net/pipermail/fot/attachm
- /html/triumphs/2018-08/msg00402.html (8,685 bytes)
- 3. [Fot] Speedster pressure (score: 1)
- Author: vintagenick42 at yahoo.com (vintagenick42)
- Date: Mon, 27 Aug 2018 23:38:21 -0700
- DaveWith my setup temps looked good with 26 and 26.5 (f&r).BUT...they were a bit smaller in diameter than the same size yokos that I had been runnin. Enough smaller that it really needed a rear gear
- /html/triumphs/2018-08/msg00403.html (8,147 bytes)
- 4. [Fot] Speedster pressure (score: 1)
- Author: sbarr at McCarty-Law.com (Barr, Scott)
- Date: Tue, 28 Aug 2018 09:11:32 +0000
- You could also check in with Hoosier. They usually have a pretty good idea of where to start. Scott (B.) Scott Barr McCarty Law LLP (920) 257-2233 Dave With my setup temps looked good with 26 and 26.
- /html/triumphs/2018-08/msg00404.html (8,417 bytes)
- 5. [Fot] Speedster pressure (score: 1)
- Author: tr4racing at googlemail.com (tr4racing at googlemail.com)
- Date: Tue, 28 Aug 2018 12:55:48 +0200
- I?ve never tested Speedsters, so my suggestion might be not fitting. With Yokohama A048 I use 30 psi cold. That gives the best lap time. Cheers Chris Von: Fot <fot-bounces at autox.team.net> Im Auftr
- /html/triumphs/2018-08/msg00405.html (8,241 bytes)
- 6. [Fot] Speedster pressure (score: 1)
- Author: vfracing at aol.com (Phil Gott)
- Date: Tue, 28 Aug 2018 07:32:07 -0400
- Dave: With A locked rear, weight balance within 2% at each wheel and speedsters, I try to end up with 30 PSI at each wheel, hot. That usually means starting at 23 front, 25 rear. Your conditions and
- /html/triumphs/2018-08/msg00406.html (10,239 bytes)
This search system is powered by
Namazu