- 1. [Fot] TR4 Rad question (score: 1)
- Author: marty sukey <trmarty@hotmail.com>
- Date: Mon, 22 Jul 2013 09:36:16 -0400 FILETIME=[715698E0:01CE86E0]
- I am buttoning up the TR4 project that I am helping a buddy with. He sent me an aluminum radiator to install. The problem that I ran into last night was the line coming off the thermostat housing sit
- /html/fot/2013-07/msg00158.html (8,405 bytes)
- 2. Re: [Fot] TR4 Rad question (score: 1)
- Author: TR4 Tony <tr4.tony@virgin.net>
- Date: Tue, 23 Jul 2013 16:07:22 +0100
- Marty This is pretty common with aftermarket rads and the easiest way to fix it is to shim the rad up to match the top hose. The bottom hose connects to a steel pipe and elbow which goes to the botto
- /html/fot/2013-07/msg00170.html (10,152 bytes)
- 3. Re: [Fot] TR4 Rad question (score: 1)
- Author: "Mike Moore" <mmoore@wave1.net>
- Date: Tue, 23 Jul 2013 11:40:50 -0400
- May not have clearance between top of radiator and closed hood. Thanks Mike Michael T. Moore, CPA 2007 West 32nd Street Erie, PA 16508 Phone: 814-868-4831 ext 103 Fax: 814-864-7383 --Original Message
- /html/fot/2013-07/msg00172.html (11,505 bytes)
- 4. Re: [Fot] TR4 Rad question (score: 1)
- Author: Bob Kramer <rkramer3@austin.rr.com>
- Date: Tue, 23 Jul 2013 12:00:03 -0500
- Mine is up and the overflow fitting brushes up against the hood brace in vibrate mode! Bob Kramer Sent from my iPhone is the http://autox.team.net/mailman/options/fot/rkramer3@austin.rr.com _________
- /html/fot/2013-07/msg00173.html (14,027 bytes)
- 5. Re: [Fot] TR4 Rad question (score: 1)
- Author: Tony Sheach <tony.sheach@live.co.uk>
- Date: Tue, 23 Jul 2013 16:53:51 +0100
- Fair point - in that case you need to either cut the mounts and reweld then, or sent it back to the supplier and get one that's made right !!! Sent from my iPhone is the _____________________________
- /html/fot/2013-07/msg00174.html (12,660 bytes)
This search system is powered by
Namazu