- 1. Re: [Fot] TR4 manifold gaskets - Update (score: 1)
- Author: "Barry Munson" <barry@penybryn.ca>
- Date: Mon, 21 Oct 2013 10:46:10 -0600
- Hi Scott - I use these gaskets on my Volvo P1800 race car, the TR3 and most recently on the 1980 460 Ford motor in my tow vehicle where they solved a whole bunch of "old" vehicle issues. So, as an in
- /html/fot/2013-10/msg00152.html (11,873 bytes)
- 2. Re: [Fot] TR4 manifold gaskets - Update (score: 1)
- Author: "Charly Mitchel" <charly@mitchelplumbing.com>
- Date: Mon, 21 Oct 2013 10:02:11 -0700
- I use the HP gasket from Moss on my TR6 and don't consider it reusable, but I have used one several times until you can't anymore, which can be once or 3 or 4 times. I've never had one separate, they
- /html/fot/2013-10/msg00154.html (14,306 bytes)
- 3. Re: [Fot] TR4 manifold gaskets - Update (score: 1)
- Author: John Wagner <j.wags63@yahoo.com>
- Date: Mon, 21 Oct 2013 13:56:50 -0700 (PDT)
- I found a Fel-Pro product called Pro-Ramic 101 it's a high temp. facing with a perforated steel core about 1/16 thick and comes in a 12''x28 1/2'' sheet (a life time supply) . With the steel core it
- /html/fot/2013-10/msg00155.html (15,212 bytes)
- 4. Re: [Fot] TR4 manifold gaskets - Update (score: 1)
- Author: "MadMarx" <tr4racing@googlemail.com>
- Date: Tue, 22 Oct 2013 20:11:04 +0200
- If you have flat flanges you can use a thin gasket if you like. Anything works. I use very thin gaskets from Bastuck. They are very cheap maybe 5$ each. I suppose you have similar stuff in USA. Never
- /html/fot/2013-10/msg00167.html (16,390 bytes)
- 5. Re: [Fot] TR4 manifold gaskets - Update (score: 1)
- Author: steve <colordog.1@earthlink.net>
- Date: Wed, 23 Oct 2013 08:59:46 -0700 (GMT-07:00)
- These work great. I can use them over and over again. http://www.cambridgemotorsport.com/Inlet--Exhaust-Manifold-Gasket--High-Port-Head ~Steve _______________________________________________ fot@auto
- /html/fot/2013-10/msg00175.html (8,793 bytes)
- 6. Re: [Fot] TR4 manifold gaskets - Update (score: 1)
- Author: Christian Marx <tr4racing@googlemail.com>
- Date: Wed, 23 Oct 2013 11:13:27 -0700
- _______________________________________________ fot@autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive
- /html/fot/2013-10/msg00180.html (9,792 bytes)
- 7. Re: [Fot] TR4 manifold gaskets - Update (score: 1)
- Author: fubog1 <fubog1@aol.com>
- Date: Wed, 23 Oct 2013 15:02:22 -0400 (EDT)
- Those are the best that I've used, if the flanges are true, as has been mentioned. Glen http://www.cambridgemotorsport.com/Inlet--Exhaust-Manifold-Gasket--High-Port -Head ____________________________
- /html/fot/2013-10/msg00181.html (10,303 bytes)
This search system is powered by
Namazu