- 1. [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: "J.C. Hassall" <jhassall@gmail.com>
- Date: Sun, 23 Aug 2015 20:14:47 -0400
- --==2828019793136751827== --089e013d1fe45c7d81051e0381c6 My TR4 spits thru the 40DCOEs at idle and speed. Timing is set to 32 degrees at 3K RPM, so idle is about 12 degrees. I thought that spitting t
- /html/fot/2015-08/msg00107.html (11,036 bytes)
- 2. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: Tony Drews <tony@tonydrews.com> mail.com>
- Date: Sun, 23 Aug 2015 19:41:21 -0500
- I run slightly larger mains and smaller air correction - 36 chokes. I think you're in the range on mains. New engine? Run OK with other carbs but not with the Webers? Are you sure your cam is timed r
- /html/fot/2015-08/msg00109.html (12,035 bytes)
- 3. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: "J.C. Hassall" <jhassall@gmail.com>
- Date: Sun, 23 Aug 2015 20:59:22 -0400
- Tnx Tony. I neglected to say that the Isky 777 was degrees bang-on. My first thought was the cam but am sure it's ok. It's only had the Webers and I don't have SUs to try. I am running shorty air hor
- /html/fot/2015-08/msg00110.html (12,955 bytes)
- 4. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: Chuck Gee <chasgee22@gmail.com>
- Date: Sun, 23 Aug 2015 18:09:09 -0700
- --==0612692839919269300== --001a113d3792c612c5051e0443d6 Content-Transfer-Encoding: quoted-printable y s to 32 tting esn't d, etc. =C3=82 The =C3=82 Plugs . --001a113d3792c612c5051e0443d6 Content-Tra
- /html/fot/2015-08/msg00111.html (21,080 bytes)
- 5. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: Mark J Bradakis <mark@bradakis.com>
- Date: Sun, 23 Aug 2015 21:59:46 -0600
- In general spitting through the carbs is a sign of too lean or bad timing. Are you sure TDC is TDC? mjb. _______________________________________________ fot@autox.team.net http://www.fot-racing.com A
- /html/fot/2015-08/msg00114.html (9,302 bytes)
- 6. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: Kas Kastner <kaskastner@gmail.com>
- Date: Sun, 23 Aug 2015 21:16:08 -0700
- --==1107057402537125907== --001a1140269ad32f17051e06e286 Content-Transfer-Encoding: quoted-printable I don't want to get to close to this, but spitting through the carb is not an unknown phenomenon a
- /html/fot/2015-08/msg00115.html (22,241 bytes)
- 7. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: Bud R <levilevi@comcast.net>
- Date: Mon, 24 Aug 2015 00:13:16 -0600
- --==2374082279259461784== --Apple-Mail=_B1B33B11-C2ED-41B9-963A-13D5C49AF06A Content-Transfer-Encoding: quoted-printable charset=us-ascii Spitting back could mean the mixture is too lean or possibly
- /html/fot/2015-08/msg00116.html (21,733 bytes)
- 8. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: toodamnfunky@comcast.net
- Date: Mon, 24 Aug 2015 17:33:19 +0000 (UTC)
- --==4542049300139581636== boundary="--=_Part_5507293_816356441.1440437599736" --=_Part_5507293_816356441.1440437599736 Content-Transfer-Encoding: quoted-printable That Isky 777 has a 110 degree lobe
- /html/fot/2015-08/msg00117.html (24,181 bytes)
- 9. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: "J.C. Hassall" <jhassall@gmail.com>
- Date: Mon, 24 Aug 2015 17:13:07 -0400
- --==7030420863186064446== --089e01493fa8869ff1051e151579 Many thanks to all who responded. I should have mentioned that the engine runs like gang busters then spits at apparently random times (irresp
- /html/fot/2015-08/msg00119.html (14,043 bytes)
- 10. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: Tony Drews <tony@tonydrews.com> mail.com>
- Date: Mon, 24 Aug 2015 20:51:24 -0500
- --==8993367653764561439== Content-Transfer-Encoding: quoted-printable <html> <body> How's your fuel pressure when the carbs seem to go south? How about EGT's? I have those gauges exactly for this kin
- /html/fot/2015-08/msg00124.html (14,242 bytes)
- 11. Re: [Fot] TR4 spitting thru Webers - haaaalp! (score: 1)
- Author: Tony Drews <tony@tonydrews.com>
- Date: Tue, 25 Aug 2015 13:01:24 -0500
- --==8079563491516630558== Content-Transfer-Encoding: quoted-printable <html> <body> The reason I mention fuel pressure is that the Webers don't seem to like much in the way of pressure. I run 2 psi.
- /html/fot/2015-08/msg00125.html (16,186 bytes)
This search system is powered by
Namazu