Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+Head\s+Bolts\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+Head\s+Bolts\s*$/: 3 ]

Total 3 documents matching your query.

1. [Healeys] Head Bolts (score: 1): Author: 050.rpl at gmail.com (R. Lindsay); Date: Fri, 13 Jan 2017 23:32:13 -0500; I have removed the left rear head bolt to replace the vacuum hose from the dizzy to the carbs (don?t ask). When I unscrewed the nut/bolt, the entire bolt came out ( the nut did not come loose). Now I; /html/fot/2017-01/msg00320.html (7,408 bytes)
2. [Healeys] Head Bolts (score: 1): Author: boyracer466 at gmail.com (richard mayor); Date: Sun, 15 Jan 2017 17:22:41 -0800; Break the nut loose from the stud. Chase all the threads on nut and stud. Put the stud back in finger tight. Then install nut and torque to 75 ft lbs. The factory manual says to torque the studs but; /html/fot/2017-01/msg00338.html (9,014 bytes)
3. [Healeys] Head Bolts (score: 1): Author: rrengineer.mike at att.net (Michael MacLean); Date: Mon, 16 Jan 2017 04:44:37 +0000 (UTC); Always a good idea to coat the threads that go into the block with Gasgacinch in case one of the water jackets were cut into when they drilled the hole and cut the threads for the stud. Mike MacLean; /html/fot/2017-01/msg00341.html (9,106 bytes)

Current List: 1 - 3
Page: [1]